QUICK GUIDE TO INSTALL STOCK AND CUSTOM FIRMWARE IMAGE FILES
This is a quick guide to Flash single firmware image files onto your tablet.
Manufacturers mainly provide single image files to upgrade tablets,
as do some Rom Cookers for their custom firmwares.
If you want to install a custom firmware or want to return your tablet back to a manufacturers stock rom,
for warranty purposes etc this is sometimes the only way to do it. It is quite straightforward to do so here we go!
Firstly this is presuming that you have already installed the
Rockchip drivers for your tablet if not follow my guide here
http://www.antgsm.com/showthread.php?t=58571
STEP 1
Make sure your tablet is charged. Download the Rockchip batch tool
Rockchip Batch Tool Download
STEP2
Unzip the file and start the RKBatchTool program, and use the firmware path
selector to find your firmware image.
Now put your tablet into recovery mode or flash mode as it is sometimes called
and connect it to your PC As you will see you will see that your device is
connected indicated by the green box. If you are upgrading from say a
manufacturers Rom to a new version that hit the upgrade button,
if you are installing a custom firmware that usually it is the restore button.
Step 3
Once you have done this the software will send the firmware to your tablet
and the flashing process will begin, you will see firmware loading on
the Rockchip BatchTool screen,just leave it to do its work and be patient
and be careful not to knock or touch anything while it is flashing. Once the process
has completed your tablet will disconnect from the program and the green box will
not be highlighted. Now the tablet will begin to flash and reboot with your new firmware on it!