hagad
Registered
- Joined
- Nov 12, 2015
- Messages
- 34
- Reaction score
- 1
- Points
- 1
J320f\ds 2016 unlock done sa octopos
elcome to Octoplus/Octopus Box Samsung software version 2.3.0
-----------------------------------------------------------------------------------
-----------------------------------------------------------------------------------
To connect SM-J320F phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-J320F
Proper android device not found. Make shure that "USB debug" option
on the device is turned on.
Phone unlocking failed
Performed by 2.3.0 software version
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-J320F
Please, press "OK" button on the phone to allow USB debugging..
Detected phone model: SM-J320F
Firmware compiled date: Thu Jul 7 10:40:33 KST 2016
PDA version: J320FXXU0APG1
CSC version: J320FOJV0APG2
SW version: J320FXXU0APG1
Phone SN: R58H94FRSFH
Android version: 5.1.1 (LMY47V)
Country: KSA
HW platform: sc8830
HW Chip: SC9830I
HW Modem: SC9830i
Codename: j3xltejt
Connecting to phone's modem port, please wait...
Found phone on COM274
Unlocking phone. This can take some time. Please wait...
Phone is successfully unlocked
To finish the operation, please restart the phone via phone's menu.
Performed by 2.3.0 software version
elcome to Octoplus/Octopus Box Samsung software version 2.3.0
-----------------------------------------------------------------------------------
-----------------------------------------------------------------------------------
To connect SM-J320F phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-J320F
Proper android device not found. Make shure that "USB debug" option
on the device is turned on.
Phone unlocking failed
Performed by 2.3.0 software version
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-J320F
Please, press "OK" button on the phone to allow USB debugging..
Detected phone model: SM-J320F
Firmware compiled date: Thu Jul 7 10:40:33 KST 2016
PDA version: J320FXXU0APG1
CSC version: J320FOJV0APG2
SW version: J320FXXU0APG1
Phone SN: R58H94FRSFH
Android version: 5.1.1 (LMY47V)
Country: KSA
HW platform: sc8830
HW Chip: SC9830I
HW Modem: SC9830i
Codename: j3xltejt
Connecting to phone's modem port, please wait...
Found phone on COM274
Unlocking phone. This can take some time. Please wait...
Phone is successfully unlocked
To finish the operation, please restart the phone via phone's menu.
Performed by 2.3.0 software version