g532f unlock done no nee root

[sugwan_123]

z3x 29.4 update

*#0808# choose ung sa baba
then
tick read codes wait 3 to 5 min hayaan lng mag restart antayin mag labas ung code



UNLOCK INSTRUCTIONS:
Direct unlock:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock' button and select 'New Unlock' for direct unlock.

To read security codes (without root permissions):
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read codes' button to read security codes.

To reset Google account activation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press 'Reset FRP' and follow the instructions in program.
5. When process done, press 'Back' on phone and perform factory reset from phone settings.

Operation: Read Codes
Selected model: SM-G532F
Software version: 29.4

Please wait, generating hash codes file, this can take few minutes... OK
Waiting ADB device... OK
Reading phone info...
Model: SM-G532F
Android version: 6.0.1
Product code: SM-G532FZDDKSA
Phone version: G532FXXU1AQG5
PDA version: G532FXWU1AQG5
CSC version: G532FOJV1AQG5
CSC country code: KSA
CSC sales code: KSA
HW version: MP 0.300
Phone SN: RV8J71PLKKB
Chip name: MT6737T
Modem board: MT6737T
Security patch: 2017-07-01
RF cal date: 20170728
IMEI: 359614087258815
Rebooting phone... OK
Waiting ADB device... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Searching Ramdump interface... COM44 detected
Reading data from phone... OK
Please wait, calculating codes... OK (time - 00:00:10)
Freeze code: 86296825
NET lock: 00000000
SUB lock: 00000000
SP lock: 00000000
CP lock: 68492649
For check lock status: *#7465625#

Done with Samsung Tool PRO v.29.4

 

[alimar]

nice share master.

 

[tandaganon]

Ayus talaga ang new update ngayon

No need root na, via read codes

 

[xzedd]

Nice....

 

[alladin]

wow ayus ah....naka update na ako pero wala namang lumapit nang masubukan heheheheh....

 

[jubel]

wow astig yung bagung update ng z3x... maraming salamat sa info master..

 

[nordz81]

z3x 29.4 update

*#0808# choose ung sa baba
then
tick read codes wait 3 to 5 min hayaan lng mag restart antayin mag labas ung code



UNLOCK INSTRUCTIONS:
Direct unlock:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock' button and select 'New Unlock' for direct unlock.

To read security codes (without root permissions):
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read codes' button to read security codes.

To reset Google account activation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press 'Reset FRP' and follow the instructions in program.
5. When process done, press 'Back' on phone and perform factory reset from phone settings.

Operation: Read Codes
Selected model: SM-G532F
Software version: 29.4

Please wait, generating hash codes file, this can take few minutes... OK
Waiting ADB device... OK
Reading phone info...
Model: SM-G532F
Android version: 6.0.1
Product code: SM-G532FZDDKSA
Phone version: G532FXXU1AQG5
PDA version: G532FXWU1AQG5
CSC version: G532FOJV1AQG5
CSC country code: KSA
CSC sales code: KSA
HW version: MP 0.300
Phone SN: RV8J71PLKKB
Chip name: MT6737T
Modem board: MT6737T
Security patch: 2017-07-01
RF cal date: 20170728
IMEI: 359614087258815
Rebooting phone... OK
Waiting ADB device... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Searching Ramdump interface... COM44 detected
Reading data from phone... OK
Please wait, calculating codes... OK (time - 00:00:10)
Freeze code: 86296825
NET lock: 00000000
SUB lock: 00000000
SP lock: 00000000
CP lock: 68492649
For check lock status: *#7465625#

Done with Samsung Tool PRO v.29.4

Pero ug akin boss, after type ko yong freeze code, ma unlock siya , kapag ishut off, blik ulit ung network code.. Any idea?....

 

[stynx]

Pero ug akin boss, after type ko yong freeze code, ma unlock siya , kapag ishut off, blik ulit ung network code.. Any idea?....

enter cp lock un ung unlockcode bro

 

[chloe23]

tested boss

 

[skyrus2009]

tested 100%.. salamat sa pag share nito.

 

[RAIEZ1991]

ayun salamat sa walang sawang pag share master sugwan of isulan