REFERENCE G930f frp

[lawliet]

open octopus samsung
select model
click reset frp
select via uart
put phone in download mode
press vol- and power until the screen notification goes out
done

Welcome to Octoplus Box Samsung software version 2.7.9
-----------------------------------------------------------------------------------
To connect SCL24 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3. Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Restart phone.
11. Press "Read Info" in software.
-----------------------------------------------------------------------------------
To connect SM-G930F phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3. Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-G930F
Operation: Reset FRP - UART UFS
Please put the phone into Download Mode and connect USB cable.
Waiting for phone...
Reading PIT...
PIT was read successfully.
Searching for UART interface.. COM53
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Checking operation...OK
Resetting FRP lock..
FRP / Reactivation lock is successfully reseted!
Performed by 2.7.9 Software version.