Galaxy S Advance Unlock DOne..[Reference]
GT-I9070P 2.3.6
-Install necessary driver;
-Write firmware GT-I9070P_for_Unlock_and_Repair_IMEI from support;
Reboot your phone;
Connect powered-on phone to BOX via Samsung Micro UART cable;
Click "Unlock" button;
Follow software instructions (prompts).
-After succesfully unlock The IMEI will be erace
need to change imei
-Connect powered-on phone to BOX via Samsung Micro UART cable;
Enter correct IMEI;
Click "IMEI fix" button;
Follow software instructions (prompts). DONE!
Welcome to Octopus Box Samsung software version 1.7.2
-----------------------------------------------------------------------------------
To connect GT-I9070P phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "UART" radio button to "Modem" value.
8. Close window.
9. Press "Read Info" in Octopus Samsung software.
Selected firmware file: GT-I9070P_for_Unlock_and_Repair_IMEI.oct
Please switch your phone to the download mode and connect it to a
PC.
To put GT-I9070P phone into download mode you have to perform the
following steps:
1. Reconnect phone battery.
2. Press and hold "Volume - " + "Home" + "Power" buttons.
3. When phone turns on press "Volume+" button.
Found phone on
Firmware write started.
Writing Kernel section...
Kernel section has been written successfully.
Writing Modem section...
Modem section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing CACHEFS section...
CACHEFS section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Firmware writing successfully completed.
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM2
Selected model: GT-I9070P
Searching for a phone. Please wait...
Detect Model Name: GT-I9070P
S/W version: I9070PAILE1
Unlocking phone...
Deactivating MSL...
MSL deactivate successfully
Unlocking phone. It can take some time. Please wait...
Please insert card into phone, if phone is locked, then type 00000000
Phone is successfully unlocked
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM2
Selected model: GT-I9070P
Searching for a phone. Please wait...
Detect Model Name: GT-I9070P
S/W version: I9070PAILE1
Old IMEI: Unknown
New IMEI: 359807-04-213459-8
Writing new IMEI. Please wait...
Deactivating MSL...
MSL deactivate successfully
New IMEI successfully written.
Please, restart the phone to apply changes
-Install necessary driver;
-Write firmware GT-I9070P_for_Unlock_and_Repair_IMEI from support;
Reboot your phone;
Connect powered-on phone to BOX via Samsung Micro UART cable;
Click "Unlock" button;
Follow software instructions (prompts).
-After succesfully unlock The IMEI will be erace
need to change imei
-Connect powered-on phone to BOX via Samsung Micro UART cable;
Enter correct IMEI;
Click "IMEI fix" button;
Follow software instructions (prompts). DONE!
Welcome to Octopus Box Samsung software version 1.7.2
-----------------------------------------------------------------------------------
To connect GT-I9070P phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "UART" radio button to "Modem" value.
8. Close window.
9. Press "Read Info" in Octopus Samsung software.
Selected firmware file: GT-I9070P_for_Unlock_and_Repair_IMEI.oct
Please switch your phone to the download mode and connect it to a
PC.
To put GT-I9070P phone into download mode you have to perform the
following steps:
1. Reconnect phone battery.
2. Press and hold "Volume - " + "Home" + "Power" buttons.
3. When phone turns on press "Volume+" button.
Found phone on
Firmware write started.
Writing Kernel section...
Kernel section has been written successfully.
Writing Modem section...
Modem section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing CACHEFS section...
CACHEFS section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Firmware writing successfully completed.
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM2
Selected model: GT-I9070P
Searching for a phone. Please wait...
Detect Model Name: GT-I9070P
S/W version: I9070PAILE1
Unlocking phone...
Deactivating MSL...
MSL deactivate successfully
Unlocking phone. It can take some time. Please wait...
Please insert card into phone, if phone is locked, then type 00000000
Phone is successfully unlocked
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM2
Selected model: GT-I9070P
Searching for a phone. Please wait...
Detect Model Name: GT-I9070P
S/W version: I9070PAILE1
Old IMEI: Unknown
New IMEI: 359807-04-213459-8
Writing new IMEI. Please wait...
Deactivating MSL...
MSL deactivate successfully
New IMEI successfully written.
Please, restart the phone to apply changes