Galaxy S3 i9300 lock on Smart. Sucessfully unlock DONE...[Reference]
Share ko lang po ang experience ko.
Tools:
1. Octopus box (Samsung Activated)
2. Usb Cable (5310)
3. Odin3-v1.85
4. CF-Root-SGS3-v6.0
Procedures:
ROOTING:
Step 1: Download ODIN 1.85, which is the tool you’ll need to flash the CF-Root package onto your device.
Step 2: Download the CF-Root-SGS3-v6.0.zip package, and extract.
Step 3: Once you’ve unpacked your CF-Root archive, you should end up with CF-Root-SGS3-v6.0.tar
Step 4: Ensuring your device is not connected to your computer, run ODIN.
Step 5: Click PDA, and select the .tar you extracted back in Step 2.
Step 6: Place your device into Download Mode by turning it off, and holding Volume Down + Home
+ Power simultaneously. Once that’s done, reconnect your phone to your computer.
Step 7: Ensuring the Repartition option is not checked, click Start, and after ODIN works its
magic (should take around thirty seconds), the job is complete, and your Samsung Galaxy
S III will have basic root access!
Unlocking:
1. ROOT your phone manualy;
2.Connect powered-on phone to PC via Micro USB cable;
3.Install necessary driver;
4.Click "Unlock" button;
5.Follow software instructions (prompts)
Logs:
Welcome to Octopus Box Samsung software version 1.4.5
-----------------------------------------------------------------------------------
To connect GT-I9300 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Connect usb cable to phone.
6. Press "Read Info" in Octopus Samsung software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: GT-I9300
Port is busy
Searching for phone. Please wait...
Phone found.
Firmware compiled date: Tue May 15 18:08:27 KST 2012
Android version: 4.0.4 (IMM76D)
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: GT-I9300
Port is busy
Searching for phone. Please wait...
Phone found.
Firmware compiled date: Tue May 15 18:08:27 KST 2012
Android version: 4.0.4 (IMM76D)
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: GT-I9300
Port is busy
Searching for phone. Please wait...
Phone found.
Firmware compiled date: Tue May 15 18:08:27 KST 2012
Android version: 4.0.4 (IMM76D)
Unlocking phone...
Unlocking phone. It can take some time. Please wait...
Phone is successfully unlocked
http://i49.tinypic.com/9ib81c.jpg
http://i46.tinypic.com/esp9ug.jpg
http://i48.tinypic.com/2lx8rrq.jpg
Tools:
1. Octopus box (Samsung Activated)
2. Usb Cable (5310)
3. Odin3-v1.85
4. CF-Root-SGS3-v6.0
Procedures:
ROOTING:
Step 1: Download ODIN 1.85, which is the tool you’ll need to flash the CF-Root package onto your device.
Step 2: Download the CF-Root-SGS3-v6.0.zip package, and extract.
Step 3: Once you’ve unpacked your CF-Root archive, you should end up with CF-Root-SGS3-v6.0.tar
Step 4: Ensuring your device is not connected to your computer, run ODIN.
Step 5: Click PDA, and select the .tar you extracted back in Step 2.
Step 6: Place your device into Download Mode by turning it off, and holding Volume Down + Home
+ Power simultaneously. Once that’s done, reconnect your phone to your computer.
Step 7: Ensuring the Repartition option is not checked, click Start, and after ODIN works its
magic (should take around thirty seconds), the job is complete, and your Samsung Galaxy
S III will have basic root access!
Unlocking:
1. ROOT your phone manualy;
2.Connect powered-on phone to PC via Micro USB cable;
3.Install necessary driver;
4.Click "Unlock" button;
5.Follow software instructions (prompts)
Logs:
Welcome to Octopus Box Samsung software version 1.4.5
-----------------------------------------------------------------------------------
To connect GT-I9300 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Connect usb cable to phone.
6. Press "Read Info" in Octopus Samsung software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: GT-I9300
Port is busy
Searching for phone. Please wait...
Phone found.
Firmware compiled date: Tue May 15 18:08:27 KST 2012
Android version: 4.0.4 (IMM76D)
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: GT-I9300
Port is busy
Searching for phone. Please wait...
Phone found.
Firmware compiled date: Tue May 15 18:08:27 KST 2012
Android version: 4.0.4 (IMM76D)
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: GT-I9300
Port is busy
Searching for phone. Please wait...
Phone found.
Firmware compiled date: Tue May 15 18:08:27 KST 2012
Android version: 4.0.4 (IMM76D)
Unlocking phone...
Unlocking phone. It can take some time. Please wait...
Phone is successfully unlocked
http://i49.tinypic.com/9ib81c.jpg
http://i46.tinypic.com/esp9ug.jpg
http://i48.tinypic.com/2lx8rrq.jpg