Samsung Galaxy Tablet SM-T285 FRP Reset - Z3X (Samsung Tool PRO)
1. Perform Hard Reset Procedure
=> Ensure the device is powered off.
=> Press and hold the Volume Up and Power buttons.
=> Continue to hold Volume Up and Power buttons until the Android Recovery screen appears (about 10-15 seconds) then release both buttons. ...
=> From the Android Recovery screen, select Wipe data/factory reset. ...
=> Select Yes.
2. Boot on Download Mode
=> Turn off tablet.
=> Press and hold the Home + Volume Down + Power keys simultaneously for 2-3 seconds.
=> Release the keys and then press the Volume Up key to continue to the Download Mode.
3. Open Z3X Pro
=> Double click SamsungToolPro.exe
=> Select Model SM-J510F
=> Connect USB from PC/Laptop to tablet & make sure that COM port is being detected. If not you may need to install the necessary driver first.
=> Click on Unlock tab
=> Click reset FRP/React/EE
=> Wait until it is Done.
1. Perform Hard Reset Procedure
=> Ensure the device is powered off.
=> Press and hold the Volume Up and Power buttons.
=> Continue to hold Volume Up and Power buttons until the Android Recovery screen appears (about 10-15 seconds) then release both buttons. ...
=> From the Android Recovery screen, select Wipe data/factory reset. ...
=> Select Yes.
2. Boot on Download Mode
=> Turn off tablet.
=> Press and hold the Home + Volume Down + Power keys simultaneously for 2-3 seconds.
=> Release the keys and then press the Volume Up key to continue to the Download Mode.
3. Open Z3X Pro
=> Double click SamsungToolPro.exe
=> Select Model SM-J510F
=> Connect USB from PC/Laptop to tablet & make sure that COM port is being detected. If not you may need to install the necessary driver first.
=> Click on Unlock tab
=> Click reset FRP/React/EE
=> Wait until it is Done.
Last edited: