http://www.mediafire.com/download/ot...w+936+full.rar
Preparation...
Plug flasher baklasin mo yung modem tingnan mo yung pic pag dikitin mo yung 1&2
Plug Power pag d umilaw bitawan muna pero kung umilaw ibig sabihin d nag dikit yung dalawang bilog ulit ka
Plug USB
1. Open Balong USB Downloader
- Click Detect
- Locate usblsafe-b315.bin
- Load
- Pag 100% na close.
2. Open Firmware Folder
- Click go_hdlc
- Enter
3. Open Huawei R215 Flash
- Locate 3G PC UI Interface (select)
- Flash
- Locate .hmf file
- Antayin na may nakasulat na Done/Remove battery and put it again..
- Close
4. Unplug Power, Unplug USB, unplug Flasher
5. Plug Power Chord, Plug LAN cable
6. Sign in 192.168.8.1 admin/admin
Unlocking sim
1. Open B315s toolbox
- admin admin
- API Control
/api/device/mode
<request>
<mode>2</mode>
</request>
- Write Directly to API
- Click Debug, check kung ang response ay OK
2.Open telnet
- telnet 192.168.8.1
type ati
- at^sfm=1
- at^reset
3. open Multicast pili ka ng gusto mong FW
unplug adaptor run multicast plug adaptor
4.WAIT mo Green Mode
open cid reader
5.at ^ nvwrex = 8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
6.AT ^ SYSCFGEX = "030201", 3FFFFFFF, 1, 2, 800C5 ,,
7.AT ^ SYSCFGEX = "0302", 3FFFFFFF, 1, 2, 800C5 ,,
at^sfm=0
at^reset
Walang iyakan at Salamat sa May ari Nang tuts Na 2 at Dun sa Bashers ko Iyak kana lang free na ang openline
kAYA wAG KANA Mag binta nang tuts
pass lakasko2
Preparation...
Plug flasher baklasin mo yung modem tingnan mo yung pic pag dikitin mo yung 1&2
Plug Power pag d umilaw bitawan muna pero kung umilaw ibig sabihin d nag dikit yung dalawang bilog ulit ka
Plug USB
1. Open Balong USB Downloader
- Click Detect
- Locate usblsafe-b315.bin
- Load
- Pag 100% na close.
2. Open Firmware Folder
- Click go_hdlc
- Enter
3. Open Huawei R215 Flash
- Locate 3G PC UI Interface (select)
- Flash
- Locate .hmf file
- Antayin na may nakasulat na Done/Remove battery and put it again..
- Close
4. Unplug Power, Unplug USB, unplug Flasher
5. Plug Power Chord, Plug LAN cable
6. Sign in 192.168.8.1 admin/admin
Unlocking sim
1. Open B315s toolbox
- admin admin
- API Control
/api/device/mode
<request>
<mode>2</mode>
</request>
- Write Directly to API
- Click Debug, check kung ang response ay OK
2.Open telnet
- telnet 192.168.8.1
type ati
- at^sfm=1
- at^reset
3. open Multicast pili ka ng gusto mong FW
unplug adaptor run multicast plug adaptor
4.WAIT mo Green Mode
open cid reader
5.at ^ nvwrex = 8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
6.AT ^ SYSCFGEX = "030201", 3FFFFFFF, 1, 2, 800C5 ,,
7.AT ^ SYSCFGEX = "0302", 3FFFFFFF, 1, 2, 800C5 ,,
at^sfm=0
at^reset
Walang iyakan at Salamat sa May ari Nang tuts Na 2 at Dun sa Bashers ko Iyak kana lang free na ang openline
kAYA wAG KANA Mag binta nang tuts
pass lakasko2
