- Joined
- Nov 7, 2015
- Messages
- 813
- Reaction score
- 3
- Points
- 81
HISTORY NG PHONE NIREST LANG NG CUSTOMER
BIGLA NA LANG DAW NG INVALID IMEI
ROOT KO MUNA USING KINGO ROOT
OPEN KO ANG SAMSUNG TOOL PRO
TYPE YUN IMEI THEN HIT REPAIR
AFTER REPAIR NAGRESTART YUN PHONE BUT STILL INVALID IMEI
DECIDE NA FLASHING
HOLD VOLUME DOWN +HOME BUTTON+POWER
INSERT USB THEN HIT FLASH
FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. If you have one file firmware, then you must check 'Use one package file' option.
4. Check flashing options if needed (Repartition, EFS clear, Boot update).
5. Power on phone in download mode (turn off phone, hold Volume Down + Home + Power).
6. Connect phone to PC with USB cable, install drivers if needed.
7. Press 'Flash' button.
Operation: Flash
Selected model: GT-S5360
Software version: 25.2
File analysis... OK
Total file size: 0x0EB1F600 (235 Mb)
Searching USB Flash Interface... detected COM42
Setup connection... OK
Reading PIT from phone... OK
Sending boot.img... OK
Sending param.lfs... OK
Sending system.img... OK
Sending userdata.img... OK
Sending BcmCP.img... OK
Sending csc.rfs... OK
Flashing done (time - 00:00:55)
Done with Samsung Tool PRO v.25.2
BIGLA NA LANG DAW NG INVALID IMEI
ROOT KO MUNA USING KINGO ROOT
OPEN KO ANG SAMSUNG TOOL PRO
TYPE YUN IMEI THEN HIT REPAIR
AFTER REPAIR NAGRESTART YUN PHONE BUT STILL INVALID IMEI
DECIDE NA FLASHING
HOLD VOLUME DOWN +HOME BUTTON+POWER
INSERT USB THEN HIT FLASH
FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. If you have one file firmware, then you must check 'Use one package file' option.
4. Check flashing options if needed (Repartition, EFS clear, Boot update).
5. Power on phone in download mode (turn off phone, hold Volume Down + Home + Power).
6. Connect phone to PC with USB cable, install drivers if needed.
7. Press 'Flash' button.
Operation: Flash
Selected model: GT-S5360
Software version: 25.2
File analysis... OK
Total file size: 0x0EB1F600 (235 Mb)
Searching USB Flash Interface... detected COM42
Setup connection... OK
Reading PIT from phone... OK
Sending boot.img... OK
Sending param.lfs... OK
Sending system.img... OK
Sending userdata.img... OK
Sending BcmCP.img... OK
Sending csc.rfs... OK
Flashing done (time - 00:00:55)
Done with Samsung Tool PRO v.25.2