- Joined
- Oct 30, 2014
- Messages
- 1,127
- Reaction score
- 19
- Points
- 181
EASY JTAG - DIRECT EMMC
I9500 (S4)
Z3X EasyJtag Software ver. 2.5.0.8
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 040170124137F9C6, ,FW Ver.: 01.58
CMD Pullup Level:484 mV
CMD Active Level:2423 mV
Box IO Level:2800 mV
CLK Rate:21000 khz
HiPower mode is off!
---------- eMMC Device Information ----------
EMMC CID : 1501003030584D56300001490116BF36
EMMC CSD : D02701320F5903FFF6DBFFEF8E40400C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 11/2012 Rev.0x0
EMMC NAME: 00XMV0 , S/N: 21561622
EMMC NAME (HEX): 3030584D563000
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 512 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.7 (MMC 5.0)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: 00XMV0_ 21561622_20170719_1236.extcsd
Done.
Running:SAMSUNG: MoviNAND Reset + Format...
Z3X EasyJtag Software ver. 2.5.0.8
Skip loading eMMC Addon Firmware
CMD Pullup Level:484 mV
CMD Active Level:2423 mV
Box IO Level:2800 mV
CLK Rate:21000 khz
EMMC ROM2/3 (Boot Partitions) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 512 kB
Sending Internal Reconfiguration Request...
Waiting configuration Apply!
Restoring configuration...
EMMC ROM2/3 (Boot Partitions) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 512 kB
Wiping Card... Please do not touch it!
Please don't forget to repair extCSD from backup!
Done.
Z3X EasyJtag Software ver. 2.5.0.8
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 040170124137F9C6, ,FW Ver.: 01.58
CMD Pullup Level:474 mV
CMD Active Level:2423 mV
Box IO Level:2800 mV
CLK Rate:21000 khz
HiPower mode is off!
---------- eMMC Device Information ----------
EMMC CID : 1501003030584D56300001490116BF36
EMMC CSD : D02701320F5903FFF6DBFFEF8E40400C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 11/2012 Rev.0x0
EMMC NAME: 00XMV0 , S/N: 21561622
EMMC NAME (HEX): 3030584D563000
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 512 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.7 (MMC 5.0)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: 00XMV0_ 21561622_20170719_1237.extcsd
Done.
Running:SAMSUNG: MoviNAND Factory Reset...
Skip loading eMMC Addon Firmware
CMD Pullup Level:474 mV
CMD Active Level:2423 mV
Box IO Level:2800 mV
CLK Rate:21000 khz
Sending Smart Wipe Request...
Wiping Card... Please do not touch it!
Please don't forget to repair extCSD from backup!
Done.
Z3X EasyJtag Software ver. 2.5.0.8
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 040170124137F9C6, ,FW Ver.: 01.58
CMD Pullup Level:464 mV
CMD Active Level:2423 mV
Box IO Level:2800 mV
CLK Rate:21000 khz
HiPower mode is off!
---------- eMMC Device Information ----------
EMMC CID : 1501003030584D56300001490116BF36
EMMC CSD : D02701320F5903FFF6DBFFEF8E40400C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 11/2012 Rev.0x0
EMMC NAME: 00XMV0 , S/N: 21561622
EMMC NAME (HEX): 3030584D563000
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 512 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.7 (MMC 5.0)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: 00XMV0_ 21561622_20170719_1237.extcsd
Done.
Running:SAMSUNG: eMMC firmware update...
EMMC NAME: 00XMV0
Confirmed eMMC Part Number: KMV3W000LM-B310
Z3X EasyJtag Software ver. 2.5.0.8
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 040170124137F9C6, ,FW Ver.: 01.58
Warning: CMD Pullup Level (474 mV) too low , check cables etc.!
CMD Active Level:2413 mV
Box IO Level:2800 mV
CLK Rate:140000 khz
Setup firmware update mode, wait 2..30 sec...
Success!
Sending eMMC firmware...
Success!
Flashing eMMC firmware...
Success!
Repairing eMMC CID...
Now Reconnect all eMMC Lines [POWER, CMD, CLK, DAT0]!
Do it until progress bar is moving (20 sec timeout)!
Success!
eMMC firmware is updated now!
Please reconnect all eMMC lines before next operation!
Please don't forget to repair extCSD from backup!
Please don't forget to configure BOOT sizes!
Done.
Z3X EasyJtag Software ver. 2.5.0.8
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 040170124137F9C6, ,FW Ver.: 01.58
CMD Pullup Level:474 mV
CMD Active Level:2413 mV
Box IO Level:2800 mV
CLK Rate:21000 khz
HiPower mode is off!
---------- eMMC Device Information ----------
EMMC CID : 1501005633573030300001494C455150
EMMC CSD : D02701320F5903FFF6DBFFEF8E40400C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 05/2014 Rev.0x0
EMMC NAME: V3W000 , S/N: 21580869
EMMC NAME (HEX): 56335730303000
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 512 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.7 (MMC 5.0)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: V3W000_ 21580869_20170719_1239.extcsd
Done.
extCSD file...C:\Users\BigBadFlasher\Desktop\GT-I9500 - TESTED Z3X JTAG\V3W00M_2512835799_20161028_2217.extcsd
Running:Repair extCSD...
Z3X EasyJtag Software ver. 2.5.0.8
Skip loading eMMC Addon Firmware
CMD Pullup Level:474 mV
CMD Active Level:2413 mV
Box IO Level:2800 mV
CLK Rate:21000 khz
Writing...
Done.
Z3X EasyJtag Software ver. 2.5.0.8
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 040170124137F9C6, ,FW Ver.: 01.58
CMD Pullup Level:474 mV
CMD Active Level:2402 mV
Box IO Level:2800 mV
CLK Rate:21000 khz
HiPower mode is off!
---------- eMMC Device Information ----------
EMMC CID : 1501005633573030300001494C455150
EMMC CSD : D02701320F5903FFF6DBFFEF8E40400C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 05/2014 Rev.0x0
EMMC NAME: V3W000 , S/N: 21580869
EMMC NAME (HEX): 56335730303000
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 512 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.7 (MMC 5.0)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: V3W000_ 21580869_20170719_1239.extcsd
Done.
You must select flash file first!
You must select flash file first!
Checking NAND Image : C:\Users\BigBadFlasher\Desktop\GT-I9500 - TESTED Z3X JTAG\I9500_Alive_Rom2_4mb.bin
Autodetected RAW data
File successefuly loaded!
Processing file...C:\Users\BigBadFlasher\Desktop\GT-I9500 - TESTED Z3X JTAG\I9500_Alive_Rom2_4mb.bin
Writing as RAW data
Z3X EasyJtag Software ver. 2.5.0.8
Skip loading eMMC Addon Firmware
CMD Pullup Level:474 mV
CMD Active Level:2402 mV
Input file : C:\Users\BigBadFlasher\Desktop\GT-I9500 - TESTED Z3X JTAG\I9500_Alive_Rom2_4mb.bin
Writing 0000400000 bytes to 0000000000 ...ROM2 (BOOT1 ROM)
Full Verify Enabled!
Done. Write Speed: 694 kB/s
Checking NAND Image : C:\Users\BigBadFlasher\Desktop\GT-I9500 - TESTED Z3X JTAG\I9500_Alive_Rom2_2mb.bin
Autodetected RAW data
File successefuly loaded!
Processing file...C:\Users\BigBadFlasher\Desktop\GT-I9500 - TESTED Z3X JTAG\I9500_Alive_Rom2_2mb.bin
Writing as RAW data
Z3X EasyJtag Software ver. 2.5.0.8
Skip loading eMMC Addon Firmware
CMD Pullup Level:474 mV
CMD Active Level:2402 mV
Input file : C:\Users\BigBadFlasher\Desktop\GT-I9500 - TESTED Z3X JTAG\I9500_Alive_Rom2_2mb.bin
Writing 0000200000 bytes to 0000000000 ...ROM2 (BOOT1 ROM)
Full Verify Enabled!
Done. Write Speed: 605 kB/s
Z3X EasyJtag Software ver. 2.5.0.8
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 040170124137F9C6, ,FW Ver.: 01.58
CMD Pullup Level:474 mV
CMD Active Level:2423 mV
Box IO Level:2800 mV
CLK Rate:21000 khz
HiPower mode is off!
---------- eMMC Device Information ----------
EMMC CID : 1501005633573030300001494C455150
EMMC CSD : D02701320F5903FFF6DBFFEF8E40400C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 05/2014 Rev.0x0
EMMC NAME: V3W000 , S/N: 21580869
EMMC NAME (HEX): 56335730303000
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 512 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.7 (MMC 5.0)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: V3W000_ 21580869_20170719_1240.extcsd
Done.
Checking NAND Image : C:\Users\BigBadFlasher\Desktop\GT-I9500 - TESTED Z3X JTAG\I9500_Alive_Rom1_Main_BN.bin
Autodetected RAW data
File successefuly loaded!
Processing file...C:\Users\BigBadFlasher\Desktop\GT-I9500 - TESTED Z3X JTAG\I9500_Alive_Rom1_Main_BN.bin
Writing as RAW data
Z3X EasyJtag Software ver. 2.5.0.8
Skip loading eMMC Addon Firmware
CMD Pullup Level:474 mV
CMD Active Level:2423 mV
Input file : C:\Users\BigBadFlasher\Desktop\GT-I9500 - TESTED Z3X JTAG\I9500_Alive_Rom1_Main_BN.bin
Writing 0010000000 bytes to 0000000000... ROM1 (USER ROM)
Full Verify Enabled!
Done. Write Speed: 1185 kB/s
Z3X EasyJtag Software ver. 2.5.0.8
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 040170124137F9C6, ,FW Ver.: 01.58
CMD Pullup Level:484 mV
CMD Active Level:2413 mV
Box IO Level:2800 mV
CLK Rate:21000 khz
HiPower mode is off!
---------- eMMC Device Information ----------
EMMC CID : 1501005633573030300001494C455150
EMMC CSD : D02701320F5903FFF6DBFFEF8E40400C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 05/2014 Rev.0x0
EMMC NAME: V3W000 , S/N: 21580869
EMMC NAME (HEX): 56335730303000
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 512 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.7 (MMC 5.0)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: V3W000_ 21580869_20170719_1245.extcsd
Done.
ATF JTAG - DIRECT EMMC
I9500 (S4)
PIC HERE
======================================================
======================================================
eMMC Test Point Connection Module
======================================================
======================================================
1. DO NOT USE THE PHONE"S BATTERY
2. Connect the Soldered TP Connections to ATF Box
3. Disconnect the USB Cable and Wait until the
the ATF Software will tell you to Connect the USB.
Interface Reset OK!
eMMC Access Type: SECTOR MODE
eMMC Supported Voltage Range:
3.5-3.6V, 3.4-3.5V, 3.3-3.4V, 3.2-3.3V, 3.1-3.2V
3.0-3.1V, 2.9-3.0V, 2.8-2.9V, 2.7-2.8V, 1.9-2.0V
CID : 1501005633573030300001494C4521CF
CSD : D02701320F5903FFF6DBFFEF8E40400D
eMMC Boot Information
Revision 1.7 (for MMC v5.0, v5.01)
BOOT PARTITION : NOT BOOT ENABLED
PARTITION ACCESS : R/W USER PARTITION
PERM_BOOT_CFG_PROT : DISABLED
PWR_BOOT_CFG_PROT : DISABLED
BOOT MODE : x1 SINGLE DATA RATE + LOW SPEED
RESET BUS WIDTH : ENABLED
eMMC FirmW UPDATE : DISABLED
EMMC CACHE SIZE : 0 KB
SUPER PAGE SIZE : 3584 KB
HC ERASE GROUP SIZE: 512 KB
USER AREA SIZE : 15758000128 BYTES
BOOT PARTITION SIZE: 4096 KB
RPMB PARTITION SIZE: 512 KB
eMMC Device Information
Manufacturer ID: SAMSUNG
Device Type : Embedded BGA
Application ID : 00
Product Name : V3W000
Product Rev : 0.0
Product SN : 01494C45
Manufactured : January 1998
Card Specific Data
CSD_STRUCTURE : Extended
SPEC_VERS : Version 4.1/4.2/4.3
TAAC : 13 ns
TRAN_SPEED : 4000000 KHz
READ_BL_LEN : 512 Bytes
C_SIZE : HIGH CAPACITY
WP_GRP_ENABLE : YES
WRITE_BL_LEN : 512 Bytes
CONTENT_PROT_APP : NO
PERM_WRITE_PROTECT: NO
TMP_WRITE_PROTECT : NO
Extended CSD Saved:
1501005633573030300001494C4521CF.ext_csd
Backup Directory:
C:\AdvanceBox Turbo Flasher\eMMC\EXT_CSD\
Task Selected: Write EXT_CSD Backup
Task Done!
Start Writing 0x00020000 Blocks at 0x00000000
Partition Selected: USER AREA
Total Elapsed Time 00:01:44
Write Success!
Start Writing 0x00002000 Blocks at 0x00000000
Partition Selected: BOOT 1
Total Elapsed Time 00:00:07
Write Success!
Start Writing 0x00002000 Blocks at 0x00000000
Partition Selected: BOOT 2
Total Elapsed Time 00:00:07
Write Success!
EASY JTAG VS ATFJ - REVIEW
easy jtag - EMMC/EASY JTAG pinout support - YES
- TP FINDER (YES, but u have to flip the emmc & have emmc data sh**, ow i meant sheet. lol
- MAGIC EMMC - YES (need to have dump of working unit, or DL from support or .ZBIN FILE OR CONVERT DUMP TO ZBIN.(8-16 gig MEMORY CARD IS ENOUGH)
- MTK SUPPORT - YES
- OPERATION - COMPLICATED
- UPDATE - FREQUENT
- Installation - EASY AS 123
- Supported Unit - MADAMI
- USB DUMP - SUPPORTED
ATFJ - NO SUPPORT AT ALL
- TP Finder - YES & its easy to use.(advantage againts it rival easy jtag)
- SDC (MAGIC MEMORY CARD, 16-32GIG REQUIREMENT)
- MTK SUPPORT - YES
- OPERATION - EASY
- UPDATE - VERY RARE (ONCE IN A BLUE MOON, last update is march 2017 12.70 but its only 12.67)
- installation - COMPLICATED (ACTIVATION SERVER ALWAYS DOWN)
- Supported Unit - U have to be resourceful, at mas madami kesa sa easy jtag
- USB DUMP (HAVENT TRIED lols)
DISCLAIMER:
REVIEW IS DONE SIMUTANEOUSLY USING EASY JTAG & ATF JTAG AT THE SAME UNIT, UTILIZING ALL
AVAILABLE RESOURCES...
DONT TAKE MY WORD FOR IT... USER OF DIFFERENT BOXES OR JTAG BOX MAY HAVE DIFFERENT OPINION, CASE TO CASE BASIS...
TY...
WLANG MAGAWA...
WALANG NET.... wlang box n available for line transfer
at the time of writing all review is done by me ( MOD.BERDUGO)
I9500 (S4)
Z3X EasyJtag Software ver. 2.5.0.8
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 040170124137F9C6, ,FW Ver.: 01.58
CMD Pullup Level:484 mV
CMD Active Level:2423 mV
Box IO Level:2800 mV
CLK Rate:21000 khz
HiPower mode is off!
---------- eMMC Device Information ----------
EMMC CID : 1501003030584D56300001490116BF36
EMMC CSD : D02701320F5903FFF6DBFFEF8E40400C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 11/2012 Rev.0x0
EMMC NAME: 00XMV0 , S/N: 21561622
EMMC NAME (HEX): 3030584D563000
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 512 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.7 (MMC 5.0)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: 00XMV0_ 21561622_20170719_1236.extcsd
Done.
Running:SAMSUNG: MoviNAND Reset + Format...
Z3X EasyJtag Software ver. 2.5.0.8
Skip loading eMMC Addon Firmware
CMD Pullup Level:484 mV
CMD Active Level:2423 mV
Box IO Level:2800 mV
CLK Rate:21000 khz
EMMC ROM2/3 (Boot Partitions) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 512 kB
Sending Internal Reconfiguration Request...
Waiting configuration Apply!
Restoring configuration...
EMMC ROM2/3 (Boot Partitions) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 512 kB
Wiping Card... Please do not touch it!
Please don't forget to repair extCSD from backup!
Done.
Z3X EasyJtag Software ver. 2.5.0.8
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 040170124137F9C6, ,FW Ver.: 01.58
CMD Pullup Level:474 mV
CMD Active Level:2423 mV
Box IO Level:2800 mV
CLK Rate:21000 khz
HiPower mode is off!
---------- eMMC Device Information ----------
EMMC CID : 1501003030584D56300001490116BF36
EMMC CSD : D02701320F5903FFF6DBFFEF8E40400C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 11/2012 Rev.0x0
EMMC NAME: 00XMV0 , S/N: 21561622
EMMC NAME (HEX): 3030584D563000
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 512 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.7 (MMC 5.0)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: 00XMV0_ 21561622_20170719_1237.extcsd
Done.
Running:SAMSUNG: MoviNAND Factory Reset...
Skip loading eMMC Addon Firmware
CMD Pullup Level:474 mV
CMD Active Level:2423 mV
Box IO Level:2800 mV
CLK Rate:21000 khz
Sending Smart Wipe Request...
Wiping Card... Please do not touch it!
Please don't forget to repair extCSD from backup!
Done.
Z3X EasyJtag Software ver. 2.5.0.8
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 040170124137F9C6, ,FW Ver.: 01.58
CMD Pullup Level:464 mV
CMD Active Level:2423 mV
Box IO Level:2800 mV
CLK Rate:21000 khz
HiPower mode is off!
---------- eMMC Device Information ----------
EMMC CID : 1501003030584D56300001490116BF36
EMMC CSD : D02701320F5903FFF6DBFFEF8E40400C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 11/2012 Rev.0x0
EMMC NAME: 00XMV0 , S/N: 21561622
EMMC NAME (HEX): 3030584D563000
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 512 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.7 (MMC 5.0)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: 00XMV0_ 21561622_20170719_1237.extcsd
Done.
Running:SAMSUNG: eMMC firmware update...
EMMC NAME: 00XMV0
Confirmed eMMC Part Number: KMV3W000LM-B310
Z3X EasyJtag Software ver. 2.5.0.8
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 040170124137F9C6, ,FW Ver.: 01.58
Warning: CMD Pullup Level (474 mV) too low , check cables etc.!
CMD Active Level:2413 mV
Box IO Level:2800 mV
CLK Rate:140000 khz
Setup firmware update mode, wait 2..30 sec...
Success!
Sending eMMC firmware...
Success!
Flashing eMMC firmware...
Success!
Repairing eMMC CID...
Now Reconnect all eMMC Lines [POWER, CMD, CLK, DAT0]!
Do it until progress bar is moving (20 sec timeout)!
Success!
eMMC firmware is updated now!
Please reconnect all eMMC lines before next operation!
Please don't forget to repair extCSD from backup!
Please don't forget to configure BOOT sizes!
Done.
Z3X EasyJtag Software ver. 2.5.0.8
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 040170124137F9C6, ,FW Ver.: 01.58
CMD Pullup Level:474 mV
CMD Active Level:2413 mV
Box IO Level:2800 mV
CLK Rate:21000 khz
HiPower mode is off!
---------- eMMC Device Information ----------
EMMC CID : 1501005633573030300001494C455150
EMMC CSD : D02701320F5903FFF6DBFFEF8E40400C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 05/2014 Rev.0x0
EMMC NAME: V3W000 , S/N: 21580869
EMMC NAME (HEX): 56335730303000
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 512 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.7 (MMC 5.0)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: V3W000_ 21580869_20170719_1239.extcsd
Done.
extCSD file...C:\Users\BigBadFlasher\Desktop\GT-I9500 - TESTED Z3X JTAG\V3W00M_2512835799_20161028_2217.extcsd
Running:Repair extCSD...
Z3X EasyJtag Software ver. 2.5.0.8
Skip loading eMMC Addon Firmware
CMD Pullup Level:474 mV
CMD Active Level:2413 mV
Box IO Level:2800 mV
CLK Rate:21000 khz
Writing...
Done.
Z3X EasyJtag Software ver. 2.5.0.8
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 040170124137F9C6, ,FW Ver.: 01.58
CMD Pullup Level:474 mV
CMD Active Level:2402 mV
Box IO Level:2800 mV
CLK Rate:21000 khz
HiPower mode is off!
---------- eMMC Device Information ----------
EMMC CID : 1501005633573030300001494C455150
EMMC CSD : D02701320F5903FFF6DBFFEF8E40400C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 05/2014 Rev.0x0
EMMC NAME: V3W000 , S/N: 21580869
EMMC NAME (HEX): 56335730303000
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 512 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.7 (MMC 5.0)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: V3W000_ 21580869_20170719_1239.extcsd
Done.
You must select flash file first!
You must select flash file first!
Checking NAND Image : C:\Users\BigBadFlasher\Desktop\GT-I9500 - TESTED Z3X JTAG\I9500_Alive_Rom2_4mb.bin
Autodetected RAW data
File successefuly loaded!
Processing file...C:\Users\BigBadFlasher\Desktop\GT-I9500 - TESTED Z3X JTAG\I9500_Alive_Rom2_4mb.bin
Writing as RAW data
Z3X EasyJtag Software ver. 2.5.0.8
Skip loading eMMC Addon Firmware
CMD Pullup Level:474 mV
CMD Active Level:2402 mV
Input file : C:\Users\BigBadFlasher\Desktop\GT-I9500 - TESTED Z3X JTAG\I9500_Alive_Rom2_4mb.bin
Writing 0000400000 bytes to 0000000000 ...ROM2 (BOOT1 ROM)
Full Verify Enabled!
Done. Write Speed: 694 kB/s
Checking NAND Image : C:\Users\BigBadFlasher\Desktop\GT-I9500 - TESTED Z3X JTAG\I9500_Alive_Rom2_2mb.bin
Autodetected RAW data
File successefuly loaded!
Processing file...C:\Users\BigBadFlasher\Desktop\GT-I9500 - TESTED Z3X JTAG\I9500_Alive_Rom2_2mb.bin
Writing as RAW data
Z3X EasyJtag Software ver. 2.5.0.8
Skip loading eMMC Addon Firmware
CMD Pullup Level:474 mV
CMD Active Level:2402 mV
Input file : C:\Users\BigBadFlasher\Desktop\GT-I9500 - TESTED Z3X JTAG\I9500_Alive_Rom2_2mb.bin
Writing 0000200000 bytes to 0000000000 ...ROM2 (BOOT1 ROM)
Full Verify Enabled!
Done. Write Speed: 605 kB/s
Z3X EasyJtag Software ver. 2.5.0.8
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 040170124137F9C6, ,FW Ver.: 01.58
CMD Pullup Level:474 mV
CMD Active Level:2423 mV
Box IO Level:2800 mV
CLK Rate:21000 khz
HiPower mode is off!
---------- eMMC Device Information ----------
EMMC CID : 1501005633573030300001494C455150
EMMC CSD : D02701320F5903FFF6DBFFEF8E40400C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 05/2014 Rev.0x0
EMMC NAME: V3W000 , S/N: 21580869
EMMC NAME (HEX): 56335730303000
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 512 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.7 (MMC 5.0)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: V3W000_ 21580869_20170719_1240.extcsd
Done.
Checking NAND Image : C:\Users\BigBadFlasher\Desktop\GT-I9500 - TESTED Z3X JTAG\I9500_Alive_Rom1_Main_BN.bin
Autodetected RAW data
File successefuly loaded!
Processing file...C:\Users\BigBadFlasher\Desktop\GT-I9500 - TESTED Z3X JTAG\I9500_Alive_Rom1_Main_BN.bin
Writing as RAW data
Z3X EasyJtag Software ver. 2.5.0.8
Skip loading eMMC Addon Firmware
CMD Pullup Level:474 mV
CMD Active Level:2423 mV
Input file : C:\Users\BigBadFlasher\Desktop\GT-I9500 - TESTED Z3X JTAG\I9500_Alive_Rom1_Main_BN.bin
Writing 0010000000 bytes to 0000000000... ROM1 (USER ROM)
Full Verify Enabled!
Done. Write Speed: 1185 kB/s
Z3X EasyJtag Software ver. 2.5.0.8
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 040170124137F9C6, ,FW Ver.: 01.58
CMD Pullup Level:484 mV
CMD Active Level:2413 mV
Box IO Level:2800 mV
CLK Rate:21000 khz
HiPower mode is off!
---------- eMMC Device Information ----------
EMMC CID : 1501005633573030300001494C455150
EMMC CSD : D02701320F5903FFF6DBFFEF8E40400C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 05/2014 Rev.0x0
EMMC NAME: V3W000 , S/N: 21580869
EMMC NAME (HEX): 56335730303000
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 512 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.7 (MMC 5.0)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: V3W000_ 21580869_20170719_1245.extcsd
Done.
ATF JTAG - DIRECT EMMC
I9500 (S4)
PIC HERE
======================================================
======================================================
eMMC Test Point Connection Module
======================================================
======================================================
1. DO NOT USE THE PHONE"S BATTERY
2. Connect the Soldered TP Connections to ATF Box
3. Disconnect the USB Cable and Wait until the
the ATF Software will tell you to Connect the USB.
Interface Reset OK!
eMMC Access Type: SECTOR MODE
eMMC Supported Voltage Range:
3.5-3.6V, 3.4-3.5V, 3.3-3.4V, 3.2-3.3V, 3.1-3.2V
3.0-3.1V, 2.9-3.0V, 2.8-2.9V, 2.7-2.8V, 1.9-2.0V
CID : 1501005633573030300001494C4521CF
CSD : D02701320F5903FFF6DBFFEF8E40400D
eMMC Boot Information
Revision 1.7 (for MMC v5.0, v5.01)
BOOT PARTITION : NOT BOOT ENABLED
PARTITION ACCESS : R/W USER PARTITION
PERM_BOOT_CFG_PROT : DISABLED
PWR_BOOT_CFG_PROT : DISABLED
BOOT MODE : x1 SINGLE DATA RATE + LOW SPEED
RESET BUS WIDTH : ENABLED
eMMC FirmW UPDATE : DISABLED
EMMC CACHE SIZE : 0 KB
SUPER PAGE SIZE : 3584 KB
HC ERASE GROUP SIZE: 512 KB
USER AREA SIZE : 15758000128 BYTES
BOOT PARTITION SIZE: 4096 KB
RPMB PARTITION SIZE: 512 KB
eMMC Device Information
Manufacturer ID: SAMSUNG
Device Type : Embedded BGA
Application ID : 00
Product Name : V3W000
Product Rev : 0.0
Product SN : 01494C45
Manufactured : January 1998
Card Specific Data
CSD_STRUCTURE : Extended
SPEC_VERS : Version 4.1/4.2/4.3
TAAC : 13 ns
TRAN_SPEED : 4000000 KHz
READ_BL_LEN : 512 Bytes
C_SIZE : HIGH CAPACITY
WP_GRP_ENABLE : YES
WRITE_BL_LEN : 512 Bytes
CONTENT_PROT_APP : NO
PERM_WRITE_PROTECT: NO
TMP_WRITE_PROTECT : NO
Extended CSD Saved:
1501005633573030300001494C4521CF.ext_csd
Backup Directory:
C:\AdvanceBox Turbo Flasher\eMMC\EXT_CSD\
Task Selected: Write EXT_CSD Backup
Task Done!
Start Writing 0x00020000 Blocks at 0x00000000
Partition Selected: USER AREA
Total Elapsed Time 00:01:44
Write Success!
Start Writing 0x00002000 Blocks at 0x00000000
Partition Selected: BOOT 1
Total Elapsed Time 00:00:07
Write Success!
Start Writing 0x00002000 Blocks at 0x00000000
Partition Selected: BOOT 2
Total Elapsed Time 00:00:07
Write Success!
EASY JTAG VS ATFJ - REVIEW
easy jtag - EMMC/EASY JTAG pinout support - YES
- TP FINDER (YES, but u have to flip the emmc & have emmc data sh**, ow i meant sheet. lol
- MAGIC EMMC - YES (need to have dump of working unit, or DL from support or .ZBIN FILE OR CONVERT DUMP TO ZBIN.(8-16 gig MEMORY CARD IS ENOUGH)
- MTK SUPPORT - YES
- OPERATION - COMPLICATED
- UPDATE - FREQUENT
- Installation - EASY AS 123
- Supported Unit - MADAMI
- USB DUMP - SUPPORTED
ATFJ - NO SUPPORT AT ALL
- TP Finder - YES & its easy to use.(advantage againts it rival easy jtag)
- SDC (MAGIC MEMORY CARD, 16-32GIG REQUIREMENT)
- MTK SUPPORT - YES
- OPERATION - EASY
- UPDATE - VERY RARE (ONCE IN A BLUE MOON, last update is march 2017 12.70 but its only 12.67)
- installation - COMPLICATED (ACTIVATION SERVER ALWAYS DOWN)
- Supported Unit - U have to be resourceful, at mas madami kesa sa easy jtag
- USB DUMP (HAVENT TRIED lols)
DISCLAIMER:
REVIEW IS DONE SIMUTANEOUSLY USING EASY JTAG & ATF JTAG AT THE SAME UNIT, UTILIZING ALL
AVAILABLE RESOURCES...
DONT TAKE MY WORD FOR IT... USER OF DIFFERENT BOXES OR JTAG BOX MAY HAVE DIFFERENT OPINION, CASE TO CASE BASIS...
TY...
WLANG MAGAWA...
WALANG NET.... wlang box n available for line transfer
at the time of writing all review is done by me ( MOD.BERDUGO)
