- Joined
- Oct 30, 2014
- Messages
- 1,127
- Reaction score
- 19
- Points
- 181
Z3X EasyJtag Software ver. 2.5.0.9
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 040170124137F9C6, ,FW Ver.: 01.58
Warning: CMD Pullup Level (0 mV) too low , check cables etc.!
CMD Active Level:1546 mV
Box IO Level:2800 mV
CLK Rate:21000 khz
HiPower mode is off!
Can't init device, Reason: CMD Timeout Error
Done.=))
Z3X EasyJtag Software ver. 2.5.0.9
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 040170124137F9C6, ,FW Ver.: 01.58
CMD Pullup Level:453 mV
CMD Active Level:1794 mV
Box IO Level:2800 mV
CLK Rate:21000 khz
HiPower mode is off!
Can't init device, Reason: OCR Ready Timeout Error [Check VCC or eMMC DEAD]
Done.=))
ERROR - WRONG PINOUT FROM EASY JTAG SUPPORTX(
WRONG PINOUT (Z3X EASY JTAG SUPPORT)
TESTED PINOUT:
RESULT:
Z3X EasyJtag Software ver. 2.5.0.9
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 040170124137F9C6, ,FW Ver.: 01.58
CMD Pullup Level:1980 mV
CMD Active Level:2361 mV
Box IO Level:2800 mV
CLK Rate:21000 khz
HiPower mode is off!
---------- eMMC Device Information ----------
EMMC CID : 1501004D424734474300215BBAE690AE
EMMC CSD : D02701320F5903FFF6DBFFEF8E40400C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 09/2013 Rev.0x0
EMMC NAME: MBG4GC , S/N: 559659750
EMMC NAME (HEX): 4D424734474300
EMMC ROM1 (Main User Data) Capacity: 29820 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 512 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.7 (MMC 5.0)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: MBG4GC_ 559659750_20170618_1457.extcsd
---------------------------------------------
Done.
THE REST IS HISTORY:=))
PM FOR ASSISTANCE & DUMP
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 040170124137F9C6, ,FW Ver.: 01.58
Warning: CMD Pullup Level (0 mV) too low , check cables etc.!
CMD Active Level:1546 mV
Box IO Level:2800 mV
CLK Rate:21000 khz
HiPower mode is off!
Can't init device, Reason: CMD Timeout Error
Done.=))
Z3X EasyJtag Software ver. 2.5.0.9
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 040170124137F9C6, ,FW Ver.: 01.58
CMD Pullup Level:453 mV
CMD Active Level:1794 mV
Box IO Level:2800 mV
CLK Rate:21000 khz
HiPower mode is off!
Can't init device, Reason: OCR Ready Timeout Error [Check VCC or eMMC DEAD]
Done.=))
ERROR - WRONG PINOUT FROM EASY JTAG SUPPORTX(
WRONG PINOUT (Z3X EASY JTAG SUPPORT)
TESTED PINOUT:
RESULT:
Z3X EasyJtag Software ver. 2.5.0.9
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 040170124137F9C6, ,FW Ver.: 01.58
CMD Pullup Level:1980 mV
CMD Active Level:2361 mV
Box IO Level:2800 mV
CLK Rate:21000 khz
HiPower mode is off!
---------- eMMC Device Information ----------
EMMC CID : 1501004D424734474300215BBAE690AE
EMMC CSD : D02701320F5903FFF6DBFFEF8E40400C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 09/2013 Rev.0x0
EMMC NAME: MBG4GC , S/N: 559659750
EMMC NAME (HEX): 4D424734474300
EMMC ROM1 (Main User Data) Capacity: 29820 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 512 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.7 (MMC 5.0)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: MBG4GC_ 559659750_20170618_1457.extcsd
---------------------------------------------
Done.
THE REST IS HISTORY:=))
PM FOR ASSISTANCE & DUMP
