GT-S8500 hang on logo done....[reference]

solenn

Registered
Joined
Sep 19, 2014
Messages
2,423
Reaction score
10
Points
381
GT-S8500 hang on logo done....[reference]

may na padpad pa s8500 samsung bada done kay octupus

here logs

Welcome to Octoplus/Octopus Box Samsung software version 1.5.5
-----------------------------------------------------------------------------------
To connect GT-S8500 phone you have to perform the following steps:
1. Go to dial window.
2. Enter "*#197328640#" number.
3. Make next steps: select Common->Service configuration->Data
service confing->USB ACM AP.
4. Restart phone.
5. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM13
Selected model: GT-S8500
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM39
Mode: Emergency
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM13
Selected model: GT-S8500
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM39
Mode: Emergency
Please, select firmware file first!
Please, select firmware file first!
Selected firmware file: E2652WZCKF1_OZHKF1.oct
Operation was canceled
Selected firmware file: S8500ZCKF2.oct
Please switch your phone to the download mode and connect it to a
PC.
To put GT-S8500 phone into download mode you have to perform the
following steps:
1. Reconnect phone battery.
2. Press and hold "Volume +" + "Camera" + "Power" buttons.
Searching for a phone. Please wait...
Found phone on COM39
Firmware write started.
Writing BOOT\BOOT_LOADER section...
Writing BOOT\DBL section...
Phone will restart now. Please don't disconnect cable!
Writing Firmware Failed
Please switch your phone to the download mode and connect it to a
PC.
To put GT-S8500 phone into download mode you have to perform the
following steps:
1. Reconnect phone battery.
2. Press and hold "Volume +" + "Camera" + "Power" buttons.
Searching for a phone. Please wait...
Writing firmware Canceled
Selected firmware file: S8500ZCKF2.oct
Please switch your phone to the download mode and connect it to a
PC.
To put GT-S8500 phone into download mode you have to perform the
following steps:
1. Reconnect phone battery.
2. Press and hold "Volume +" + "Camera" + "Power" buttons.
Searching for a phone. Please wait...
Found phone on COM40
Firmware write started.
Writing BOOT\BOOT_LOADER section...
Writing BOOT\DBL section...
Phone will restart now. Please don't disconnect cable!
Writing AMSS section...
AMSS section has been written successfully.
Writing APPS section...
APPS section has been written successfully.
Writing RSRC1 section...
RSRC1 section has been written successfully.
Writing RSRC2 section...
RSRC2 section has been written successfully.
Writing FactoryFS section...
Formating FactoryFS partition...
Formating successfully compleated
FactoryFS section has been written successfully.
Writing CSC section...
CSC section has been written successfully.
Writing SHPAPP section...
SHPAPP section has been written successfully.
Phone will restart now
Firmware writing successfully completed.​
 
Who read this thread (Total readers: 0)
No registered users viewing this thread.
Back
Top