- Joined
- Nov 22, 2014
- Messages
- 1,359
- Reaction score
- 10
- Points
- 181
THIS IS VANILLA NOT DISTRO!
1st > you need to know your specification of your computer.
2nd > patience 100%.
Requirements :
MAC Book or any mac os or if you don't have mac book OR any mac os you can use this VMWARE mac os x YOSEMITE on windows to create a bootable usb.
USB 8GB
LAPTOP or Desktop
download for vmware yosemite
credits to tech review
https://drive.google.com/folderview?id=0B6ISDhJomGd8d0lJSTN2TG9VVkU&usp=sharing
or watch their videos here for the tutorial https://www.youtube.com/watch?v=G-r8CvCnen4
ASSUMING you have mac os on vmware or you have a real mac book.
download el capitan from appstore.
after download finish.
create your bootable usb now.
go safari browser then go here (http://muntashirakon.github.io/Mac-OS-Installation-Helper/) credits to the owner Akon Muntashir
read the instruction carefully.
insert your 8GB usb
make sure you know your graphics driver it is the very most important otherwise your computer will not boot.
choose your graphics driver
choose your ethernet /wireless driver
other drivers will be install later.
then click download.
open terminal then type the command :
cd ~/Downloads && chmod 755 usb_helper.sh && mkdir helper && mv usb_helper.sh helper/ && cd helper/ && bash usb_helper.sh
note : just pay more attention here, just follow the instruction carefully on the terminal command.
after creating a bootable usb.
restart your computer and go to your bios setting if your bios is supported UEFI much better.just disable boot secure. and make sure your first boot is usb8gb you created earlier.
ASSUMING The installation is Finish: INSTALLATION TIME 30mins-40mins
after installation finish.
download clover configuration
http://mac.softpedia.com/get/System-Utilities/Clover-Configurator.shtml
click mount EFI > click open partition.
open EFI/CLOVER/KEXT copy 10.10 folder
open EFI/CLOVER/DRIVER64 copy the HFSplus file
open EFI/CLOVER copy config.plist
remove/eject your usb.
take note:
you cannot boot your desktop/laptop without usb.so you need to download clover EFI Boot loader so you can boot normally your computer.
http://sourceforge.net/projects/cloverefiboot/
run clover r3333 latest.
follow the instruction carefully.
click FINDER
go to EFI/CLOVER/KEXT
copy the files inside 10.10 folder that you copied earlier then put it on EFI/CLOVER/KEXT/10.11 folder then close.
copy the files HFSplus to EFI/CLOVER/Driver64 inside driver64.
replace or copy the files config.plist on EFI/CLOVER/
now restart your computer without USB.
download multibeast elcapitan for drivers
you must select your drivers
finish!
DOWNLOAD
MAC IASL by REHABMAN = https://github.com/RehabMan/OS-X-MaciASL-patchmatic
LAPTOP PATCHES by REHABMAN = https://github.com/RehabMan/Laptop-DSDT-Patch
CPU POWER MANAGEMENT for better performance = https://github.com/Piker-Alpha/ssdtPRGen.sh
to make USB 2.0 & 3.0 Working correctly = https://github.com/RehabMan/OS-X-USB-Inject-All
Battery status working = https://github.com/RehabMan/OS-X-ACPI-Battery-Driver
Tutorial for patching your ACPI files
Soon..
Thank you to Mr.Rehabman for giving me permission.
Credits to the owner of files MR. Rehabman.
Credits to the owner by creating bootable usb Muntashir Akon
i will update this thread everyday
DO THIS AT YOUR OWN RISK!
I AM NOT RESPONSIBLE FOR ANY DAMAGE OF YOUR DESKTOP / LAPTOP.
FINISH.....
1st > you need to know your specification of your computer.
how to know your codec ID? - download CPU-Z search it from google, or go to device manager..example right click audio then properties..you can see your vendor ID 10EC; device ID 0282 means 10EC;0282 its realtek you can search it from google if you are in doubt.
2nd > patience 100%.
Requirements :
MAC Book or any mac os or if you don't have mac book OR any mac os you can use this VMWARE mac os x YOSEMITE on windows to create a bootable usb.
USB 8GB
LAPTOP or Desktop
download for vmware yosemite
credits to tech review
https://drive.google.com/folderview?id=0B6ISDhJomGd8d0lJSTN2TG9VVkU&usp=sharing
or watch their videos here for the tutorial https://www.youtube.com/watch?v=G-r8CvCnen4
ASSUMING you have mac os on vmware or you have a real mac book.
download el capitan from appstore.
after download finish.
create your bootable usb now.
go safari browser then go here (http://muntashirakon.github.io/Mac-OS-Installation-Helper/) credits to the owner Akon Muntashir
read the instruction carefully.
insert your 8GB usb
make sure you know your graphics driver it is the very most important otherwise your computer will not boot.
choose your graphics driver
choose your ethernet /wireless driver
other drivers will be install later.
then click download.
open terminal then type the command :
cd ~/Downloads && chmod 755 usb_helper.sh && mkdir helper && mv usb_helper.sh helper/ && cd helper/ && bash usb_helper.sh
note : just pay more attention here, just follow the instruction carefully on the terminal command.
after creating a bootable usb.
restart your computer and go to your bios setting if your bios is supported UEFI much better.just disable boot secure. and make sure your first boot is usb8gb you created earlier.
ASSUMING The installation is Finish: INSTALLATION TIME 30mins-40mins
after installation finish.
download clover configuration
http://mac.softpedia.com/get/System-Utilities/Clover-Configurator.shtml
click mount EFI > click open partition.
open EFI/CLOVER/KEXT copy 10.10 folder
open EFI/CLOVER/DRIVER64 copy the HFSplus file
open EFI/CLOVER copy config.plist
remove/eject your usb.
take note:
you cannot boot your desktop/laptop without usb.so you need to download clover EFI Boot loader so you can boot normally your computer.
http://sourceforge.net/projects/cloverefiboot/
run clover r3333 latest.
follow the instruction carefully.
click FINDER
go to EFI/CLOVER/KEXT
copy the files inside 10.10 folder that you copied earlier then put it on EFI/CLOVER/KEXT/10.11 folder then close.
copy the files HFSplus to EFI/CLOVER/Driver64 inside driver64.
replace or copy the files config.plist on EFI/CLOVER/
now restart your computer without USB.
download multibeast elcapitan for drivers
you must select your drivers
finish!
DOWNLOAD
MAC IASL by REHABMAN = https://github.com/RehabMan/OS-X-MaciASL-patchmatic
LAPTOP PATCHES by REHABMAN = https://github.com/RehabMan/Laptop-DSDT-Patch
CPU POWER MANAGEMENT for better performance = https://github.com/Piker-Alpha/ssdtPRGen.sh
to make USB 2.0 & 3.0 Working correctly = https://github.com/RehabMan/OS-X-USB-Inject-All
Battery status working = https://github.com/RehabMan/OS-X-ACPI-Battery-Driver
Tutorial for patching your ACPI files
Soon..
Thank you to Mr.Rehabman for giving me permission.
Credits to the owner of files MR. Rehabman.
Credits to the owner by creating bootable usb Muntashir Akon
i will update this thread everyday
DO THIS AT YOUR OWN RISK!
I AM NOT RESPONSIBLE FOR ANY DAMAGE OF YOUR DESKTOP / LAPTOP.
FINISH.....
