Hardbrick MyPhone My 27 done with tested file and procedure...

[mharko vera]

no power

INSTRUCTIONS:

- Download all files needed
- Install Spreadtrum Drivers (Link Below For Spreadtum Driver)
- Extract my27-Unbrick-File.rar
- On the extracted my27-Unbrick-File.rar, right click on the ResearchDownload.exe, select Run as Administrator
- On Research Download, click the Double Gear Icon on the top. (the 2nd Icon)
- Check only FDL1, FDL2, SYSTEM, USERDATA
- Again Check only FDL1, FDL2, SYSTEM and USERDATA, uncheck everything else
- Click Play (the triangle icon)
- Turn off your my27
- Press and Hold Vol. Up and Vol. Down.
- Connect it to your PC via USB Cable while still pressing Vol. Up and Vol Down.
- when it starts loading you can let go of the volume keys
- Wait until Research Download finish loading
- when Finish, you can now remove your phone
- Remove Battery and put it back now you can turn on you my27.
- 1st Boot is around 10mins

make sure nyo lng na 70% yung battery,
para walang error

pag nag error yung repartition close researchdownloader open ulet at i run administration hangang hindi na wawala yung error..

done

done imei

download this https://mega.nz/#!O5cxjDxA!4VLWZ0np1-gv4KQFXF6WrYLf8i15GWRdR8SY0yM7iPo

TECHNICIAN ONLY!!!! :-bd

 

[jemboy]

boss, tanong ko lang, ok po tong firmware for myphone my 27 na ang problema ay walang display pag galing nka of, i mean merong dispaly pero pag inoff ang unit tapos on balik,wala nang display..help nman boss ty!

 

[Lans7]

congrats boss

 

[montalesd]

congrats boss ma try to

 

[jemboy]

pwede po ba mga boss?

 

[PERRYJUN]

meron sakin dito, blue screen lang, reflash and after flash same problem blue screen

 

[mharko vera]

boss, tanong ko lang, ok po tong firmware for myphone my 27 na ang problema ay walang display pag galing nka of, i mean merong dispaly pero pag inoff ang unit tapos on balik,wala nang display..help nman boss ty!

nag try kana boss mag palit nang lcd?

 

[mharko vera]

meron sakin dito, blue screen lang, reflash and after flash same problem blue screen

yung saken boss dead ung unit ok naman nung sinundan ko yung procedure kaylangan kasi 70% o mas mataas pa yung battery nya para walang error,

me na flash akong unit na ganyan ang problema blue screen nung flash ko same problem parin blue screen try kong mag palit ng lcd nag ka display boss.

 

[WhiteSatan66]

Bossing pano po pag ganito palaging failed sya sa flashing?

Failed: Wait input time out?

Please help and advise po

thanks