help boss sa mga batikas sa easy jatag anu po kulang dito

[jhedguan]

Compression if OFF
Z3X EasyJtag Software ver. 2.9.0.0
Loading eMMC GEN2 Firmware... IO: 2800 mV
Initial pull results:
clock: 2528mV pin connected ok
command: 2529mV pin connected ok
data0: 2526mV pin connected ok
data1: 2526mV pin connected ok
data2: 2531mV pin connected ok
data3: 2531mV pin connected ok
data4: 2529mV pin connected ok
data5: 2531mV pin connected ok
data6: 2528mV pin connected ok
data7: 2540mV pin connected ok
Box S/N: 92ED1174D749A09C, ,FW Ver.: 02.30
Box IO Level:2800 mV
CLK Rate:42000 kHz
Bus Width:8bit,SDR
HiPower mode is off!
Can't init device, Reason: CMD Timeout Error
Done.