How To Flash / Install Firmware Lenovo S90 Sisley.

[NEKNEKs]

Guide Flash Lenovo S90 Sisley.

First time you need is download Official firmware for Lenovo S90 Sisley,

1. You can download this firmware here.
2. After download finish, you can extract or unzip this file to certain folder.
3. Then, copy this entire folder to the internal memory of your Lenovo S90 Sisley smartphone.
4. Turn off the Lenovo S90 Sisley phone
5. Now, you must enter recovery mode your Lenovo S90 Sisley by Press the power button and the lower volume key and hold it until the Lenovo logo show on the screen, and then lock button can be released.
6. Now your Lenovo S90 Sisley is in the recovery mode.
7. Then select Update from sd-card, navigate to your firmware file
8. Then the process should start flashing your Lenovo S90 Sisley
9. After completing installingin firmware, You can choose the item reboot system now
10. Wait a moment, now your Lenovo S90 Sisley will boot with a new firmware installed.
11. Finish

Change Country code on your Lenovo S90 -A Sisley smartphone.


After you successfully install a new firmware on your Lenovo S90 Sisley smartphone, now you must change contry code for this phone.
Go to the dialer (phone number nabiratel) and enter the code — ####6020#.

1. ​

 

[markmanly]

not working boss sakin

 

[markmanly]

no signal sakin gumana flash pero walng serial pati radio band ayaw mag on