- Joined
- Oct 17, 2014
- Messages
- 2,447
- Reaction score
- 22
- Points
- 381
How to Repair IMEI Number of LG MTK Android,Phone
NO PC
NO USB
NO ROOT
AFTER RESAT PHONE NO BACK OLD IMEI
Now just dial *#*#3646633#*#* on your dial pad to go to the Engineer Mode
swipe left side to go into Connectivity.
In the Connectivity click on the CDS information.
And then Tap on the Radio information.
Then you will be able to see Phone 1 and Phone 2 (if you have a Dual Sim Phone)
Just click on Phone 1 first. then enter the Command as AT+EGMR=1,7,"your first imei" without space as in image below and then tap on SEND AT COMMAND it will show you that command sent,
Now press back button and Tap on Phone 2 (if you have a Dual Sim phone) and TypeAT+EGMR=1,10,"second imei" and tap on send at command.
Now Just Restart you device and enjoy now Sim Card will Display the Network in the status bar.You can see your IMEI by pressing *#06#
THIS ERROR this command is not allowed in userbuild
Code:
in line ""AT +EGMR=1,7,"IMEI_1" YOU MUST ENTER SPACE BETWEEN AT and +, so not AT+EG... but AT +EG </pre>
NO PC
NO USB
NO ROOT
AFTER RESAT PHONE NO BACK OLD IMEI
Now just dial *#*#3646633#*#* on your dial pad to go to the Engineer Mode
swipe left side to go into Connectivity.
In the Connectivity click on the CDS information.
And then Tap on the Radio information.
Then you will be able to see Phone 1 and Phone 2 (if you have a Dual Sim Phone)
Just click on Phone 1 first. then enter the Command as AT+EGMR=1,7,"your first imei" without space as in image below and then tap on SEND AT COMMAND it will show you that command sent,
Now press back button and Tap on Phone 2 (if you have a Dual Sim phone) and TypeAT+EGMR=1,10,"second imei" and tap on send at command.
Now Just Restart you device and enjoy now Sim Card will Display the Network in the status bar.You can see your IMEI by pressing *#06#
THIS ERROR this command is not allowed in userbuild
Code:
in line ""AT +EGMR=1,7,"IMEI_1" YOU MUST ENTER SPACE BETWEEN AT and +, so not AT+EG... but AT +EG </pre>
