Htc d626h pin lock ,frp unlock done
Action : Format UserData.
Selected HTC:HTC 620
Exe version: NCKDongle AndroidMTK 2.5.9.7
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB Port (COM6)
Boot mode: Brom
BBCHIP: 337 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
[emmi]EMMC CID: 90014a484147326505
----------------------------------------------------
BaseBand CPU :MT6753
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : FE
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (117Gb+16384Mb) HYNIX 0x484147326505
EMMC FW VERSION: 07:00:00:00:00:00:00:00
EMMC CID: 90014A484147326505 : 00000000000000
EMMC UA SIZE: 0x3ab800000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3ac400000 [14.691 GB]
Status: USB_FULL_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM5)
Detecting format adress....wait!
Starting generic userdata format...!
Partition: cache begin: 0x32000000 length: 0x10000000
Partition: userdata begin: 0x106000000 length: 0x298000000
Phone can start slow at first power on
If phone stuck on logo, perform wipe from recovery.
First start can take up to 5 min on some phones.
Wait untill phone will start charging.
All done.
Exe version: NCKDongle AndroidMTK 2.5.9.7
Selected model: HTC HTC 620
[auto]Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB Port (COM6)
Boot mode: Brom
BBCHIP: 337 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
[emmi]EMMC CID: 90014a484147326505
----------------------------------------------------
BaseBand CPU :MT6753
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : FE
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (117Gb+16384Mb) HYNIX 0x484147326505
EMMC FW VERSION: 07:00:00:00:00:00:00:00
EMMC CID: 90014A484147326505 : 00000000000000
EMMC UA SIZE: 0x3ab800000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3ac400000 [14.691 GB]
Checking data, wait...
Writing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
All done.
Action : Format UserData.
Selected HTC:HTC 620
Exe version: NCKDongle AndroidMTK 2.5.9.7
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB Port (COM6)
Boot mode: Brom
BBCHIP: 337 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
[emmi]EMMC CID: 90014a484147326505
----------------------------------------------------
BaseBand CPU :MT6753
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : FE
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (117Gb+16384Mb) HYNIX 0x484147326505
EMMC FW VERSION: 07:00:00:00:00:00:00:00
EMMC CID: 90014A484147326505 : 00000000000000
EMMC UA SIZE: 0x3ab800000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3ac400000 [14.691 GB]
Status: USB_FULL_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM5)
Detecting format adress....wait!
Starting generic userdata format...!
Partition: cache begin: 0x32000000 length: 0x10000000
Partition: userdata begin: 0x106000000 length: 0x298000000
Phone can start slow at first power on
If phone stuck on logo, perform wipe from recovery.
First start can take up to 5 min on some phones.
Wait untill phone will start charging.
All done.
Exe version: NCKDongle AndroidMTK 2.5.9.7
Selected model: HTC HTC 620
[auto]Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB Port (COM6)
Boot mode: Brom
BBCHIP: 337 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
[emmi]EMMC CID: 90014a484147326505
----------------------------------------------------
BaseBand CPU :MT6753
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : FE
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (117Gb+16384Mb) HYNIX 0x484147326505
EMMC FW VERSION: 07:00:00:00:00:00:00:00
EMMC CID: 90014A484147326505 : 00000000000000
EMMC UA SIZE: 0x3ab800000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3ac400000 [14.691 GB]
Checking data, wait...
Writing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
All done.