<article>
<ins data-adsbygoogle-status="done" class="adsbygoogle" style="display: block; height: 90px;" data-ad-client="ca-pub-6038290379100438" data-ad-slot="4628494838" data-ad-format="auto"><ins id="aswift_1_expand" style="display:inline-table;border:none;height:90px;margin:0;padding:0;position:relative;visibility:visible;width:975px;background-color:transparent"><ins id="aswift_1_anchor" style="display:block;border:none;height:90px;margin:0;padding:0;position:relative;visibility:visible;width:975px;background-color:transparent"></ins></ins></ins>
B315s-936 Unlock and Admin Access
Step 1: Enter USB Mode (Steady Green Color)
a. Connect LAN cable from the LAN port of your modem to your PC and turn it on.
b. Run Multicast Upgrade Tool as administrator.
c. Make sure that your LAN card is properly chosen under “Network Card†option.
d. Under “File Path†option click “Open†and browse for the 931.bin file. Do not click “Start†at this point.
e. Unplug your modem.
f. Click “Start†in your Multicast Upgrade Tool.
g. Plug your modem and wait until the mode indicator displays a steady red color.
h. Press and hold “WPS†and “Power†buttons on your modem simultineously until the the red color turns off twice then release the buttons.
i. Wait until the Mode indicator turns green and close Multicast Upgrade Tool.
j. Install Mobile Partner on your PC to provide the necessary USB drivers for your modem.
k. Connect your modem to your PC via USB cable.
l. Take note of the COM port (Huawei UI interface) under LPT/COM ports in device manager.
Step 2: Run CID reader in USB mode and enter the following commands.
Note: select proper COM port in your CID reader before entering the codes below. Do not edit the codes unless you know what you are doing. You might brick your modem by doing so.
First code:
at ^ nvwrex = 8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0 ===>unlock permanently
Second code:
AT ^ SYSCFGEX = "00", 3FFFFFFF, 1,2,800C5 ,, ===>register to for 3G network first. If 3G is
not available then LTE. If LTE is not available then 2G. All frequency bands are selected.
Third Code:
AT ^ SYSCFGEX = "0302", 400000,1,2,800C5 ,, ===> Set the URL of the Network to be connected whose APN is to be obtained from
Fourth Code:
AT^reset ===> Reboots the modem.
Congrats. Your modem is now unlocked.
How to Obtain Admin Access:
Enter USB mode by following step 1.
Run CID reader in USB mode and enter the following commands.
Note: select proper COM port in your CID reader before entering the codes below
Enter the following commands:
First Code:
at^datalock? ===> Query Datalock Status Value. Default value is “1†(Enabled)
Second Code:
AT ^ NVWREX = 50502,0,128,4A FB 2D 5A 34 74 86 F0 A6 CC AE 46 99 53 83 1D 5C B1 7E 2A EF B2 B0 1A EF 53 03 8E C8 FF 1C 0D 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 8B 8C F4 B5 AF 0C F2 2C FE E0 F4 46 9C CF 47 95 36 71 1F 1C BF 05 7F 84 AB A9 F2 92 89 33 3C 01 00 00 12 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ===> Sets The Datalock Value to 12345678
Third Code:
at^datalock="12345678" ===> Sets Datalock Status value to “0†(Disabled)
Fourth Code:
at^sfm=1 ===> This will set your modem to factory mode
Fifth Code:
AT^reset ===> This will reset your modem. Wait until the modem reboots and shows a
steady power light indicator.
Connect your modem to your PC via USB Cable
Under “Network Propertiesâ€, Set IP manually as follows:
Tick “Use the Following IP Addressâ€
IP address: 192.168.1.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
Tick “Use the following DNS Server Adressessâ€
Preferred DNS: 192.168.1.1
Alternate DNS: (leave blank)
Click OK
Run “Config Updater†and wait for it to complete successfully.
Reboot modem.
Enter USB mode.
Run CID reader in USB mode and enter the following commands:
Code 1:
at^sfm=0 ===> This command will kick your modem out of factory mode
Code 2:
AT^reset ===> Resets and reboots the modem
After successfully rebooting, try to log into the modem’s web interface by typing 192.168.254.254 in your browser.
Username: admin
Password: admin
Go to Settings.
Choose Restore Default
The modem will reboot.
Done. You now have admin access to your modem.
A simple thanks is appreciated. Credits to the people of ********** who have provided the AT codes for unlocking as well as admin access. You know who you are.
Eto yung mga link (Dev-Host):
Dev-Host - Huawei B593s-936 Unlock Instructions (Updated).rar - The Ultimate Free File Hosting / File Sharing Service ===>B315s-936 Unlock Instructions (Updated).rar
Dev-Host - B593s-22_Multicast_upgrade_tool.exe - The Ultimate Free File Hosting / File Sharing Service ===>B593s-22_Multicast_upgrade_tool.exe
Dev-Host - Mobile Partner.rar - The Ultimate Free File Hosting / File Sharing Service ===>Mobile Partner.rar
Dev-Host - Config Updater.rar - The Ultimate Free File Hosting / File Sharing Service ===>Config Updater.rar
Dev-Host - CID Reader.exe - The Ultimate Free File Hosting / File Sharing Service ===>CID Reader.exe
Dev-Host - 931.BIN - The Ultimate Free File Hosting / File Sharing Service ===>931.BIN
Dev-Host - Huawei Driver v 5.01.06.00.rar - The Ultimate Free File Hosting / File Sharing Service ===>Huawei Driver v 5.01.06.00.rar (For Windows 8 OS and Above)
Screenshots:
Dev-Host - Admin Access Screenshots.docx - The Ultimate Free File Hosting / File Sharing Service ===>Admin Access SS
Mediafire Link (Single File):
HUAWEI B315S-936 Unlock and Admin Access.rar ===>B315s-Unlock and Admin Access.rar
Huawei B593s-936 Unlock Instructions (Updated).rar ===>B315s-936 Unlock Instructions (Updated).rar
anjan na lahat ng kelangan nyu sana maintindihan nyu sa mga gusto magtanung dito lang po aku tutulungan ku kayung ma openline nyang modem nyung b315-936
CREDITS PO SA OWNER NG TUTORIAL NITO **********RS
</article> Step 1: Enter USB Mode (Steady Green Color)
a. Connect LAN cable from the LAN port of your modem to your PC and turn it on.
b. Run Multicast Upgrade Tool as administrator.
c. Make sure that your LAN card is properly chosen under “Network Card†option.
d. Under “File Path†option click “Open†and browse for the 931.bin file. Do not click “Start†at this point.
e. Unplug your modem.
f. Click “Start†in your Multicast Upgrade Tool.
g. Plug your modem and wait until the mode indicator displays a steady red color.
h. Press and hold “WPS†and “Power†buttons on your modem simultineously until the the red color turns off twice then release the buttons.
i. Wait until the Mode indicator turns green and close Multicast Upgrade Tool.
j. Install Mobile Partner on your PC to provide the necessary USB drivers for your modem.
k. Connect your modem to your PC via USB cable.
l. Take note of the COM port (Huawei UI interface) under LPT/COM ports in device manager.
Step 2: Run CID reader in USB mode and enter the following commands.
Note: select proper COM port in your CID reader before entering the codes below. Do not edit the codes unless you know what you are doing. You might brick your modem by doing so.
First code:
at ^ nvwrex = 8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0 ===>unlock permanently
Second code:
AT ^ SYSCFGEX = "00", 3FFFFFFF, 1,2,800C5 ,, ===>register to for 3G network first. If 3G is
not available then LTE. If LTE is not available then 2G. All frequency bands are selected.
Third Code:
AT ^ SYSCFGEX = "0302", 400000,1,2,800C5 ,, ===> Set the URL of the Network to be connected whose APN is to be obtained from
Fourth Code:
AT^reset ===> Reboots the modem.
Congrats. Your modem is now unlocked.
How to Obtain Admin Access:
Enter USB mode by following step 1.
Run CID reader in USB mode and enter the following commands.
Note: select proper COM port in your CID reader before entering the codes below
Enter the following commands:
First Code:
at^datalock? ===> Query Datalock Status Value. Default value is “1†(Enabled)
Second Code:
AT ^ NVWREX = 50502,0,128,4A FB 2D 5A 34 74 86 F0 A6 CC AE 46 99 53 83 1D 5C B1 7E 2A EF B2 B0 1A EF 53 03 8E C8 FF 1C 0D 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 8B 8C F4 B5 AF 0C F2 2C FE E0 F4 46 9C CF 47 95 36 71 1F 1C BF 05 7F 84 AB A9 F2 92 89 33 3C 01 00 00 12 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ===> Sets The Datalock Value to 12345678
Third Code:
at^datalock="12345678" ===> Sets Datalock Status value to “0†(Disabled)
Fourth Code:
at^sfm=1 ===> This will set your modem to factory mode
Fifth Code:
AT^reset ===> This will reset your modem. Wait until the modem reboots and shows a
steady power light indicator.
Connect your modem to your PC via USB Cable
Under “Network Propertiesâ€, Set IP manually as follows:
Tick “Use the Following IP Addressâ€
IP address: 192.168.1.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
Tick “Use the following DNS Server Adressessâ€
Preferred DNS: 192.168.1.1
Alternate DNS: (leave blank)
Click OK
Run “Config Updater†and wait for it to complete successfully.
Reboot modem.
Enter USB mode.
Run CID reader in USB mode and enter the following commands:
Code 1:
at^sfm=0 ===> This command will kick your modem out of factory mode
Code 2:
AT^reset ===> Resets and reboots the modem
After successfully rebooting, try to log into the modem’s web interface by typing 192.168.254.254 in your browser.
Username: admin
Password: admin
Go to Settings.
Choose Restore Default
The modem will reboot.
Done. You now have admin access to your modem.
A simple thanks is appreciated. Credits to the people of ********** who have provided the AT codes for unlocking as well as admin access. You know who you are.
Eto yung mga link (Dev-Host):
Dev-Host - Huawei B593s-936 Unlock Instructions (Updated).rar - The Ultimate Free File Hosting / File Sharing Service ===>B315s-936 Unlock Instructions (Updated).rar
Dev-Host - B593s-22_Multicast_upgrade_tool.exe - The Ultimate Free File Hosting / File Sharing Service ===>B593s-22_Multicast_upgrade_tool.exe
Dev-Host - Mobile Partner.rar - The Ultimate Free File Hosting / File Sharing Service ===>Mobile Partner.rar
Dev-Host - Config Updater.rar - The Ultimate Free File Hosting / File Sharing Service ===>Config Updater.rar
Dev-Host - CID Reader.exe - The Ultimate Free File Hosting / File Sharing Service ===>CID Reader.exe
Dev-Host - 931.BIN - The Ultimate Free File Hosting / File Sharing Service ===>931.BIN
Dev-Host - Huawei Driver v 5.01.06.00.rar - The Ultimate Free File Hosting / File Sharing Service ===>Huawei Driver v 5.01.06.00.rar (For Windows 8 OS and Above)
Screenshots:
Dev-Host - Admin Access Screenshots.docx - The Ultimate Free File Hosting / File Sharing Service ===>Admin Access SS
Mediafire Link (Single File):
HUAWEI B315S-936 Unlock and Admin Access.rar ===>B315s-Unlock and Admin Access.rar
Huawei B593s-936 Unlock Instructions (Updated).rar ===>B315s-936 Unlock Instructions (Updated).rar
anjan na lahat ng kelangan nyu sana maintindihan nyu sa mga gusto magtanung dito lang po aku tutulungan ku kayung ma openline nyang modem nyung b315-936
CREDITS PO SA OWNER NG TUTORIAL NITO **********RS
<ins data-adsbygoogle-status="done" class="adsbygoogle" style="display: block; height: 90px;" data-ad-client="ca-pub-6038290379100438" data-ad-slot="4628494838" data-ad-format="auto"><ins id="aswift_1_expand" style="display:inline-table;border:none;height:90px;margin:0;padding:0;position:relative;visibility:visible;width:975px;background-color:transparent"><ins id="aswift_1_anchor" style="display:block;border:none;height:90px;margin:0;padding:0;position:relative;visibility:visible;width:975px;background-color:transparent"></ins></ins></ins>
