REFERENCE Huawei HRY-LX1 9.1.0. FRP [DONE]

[maxie]

hi

Unit : Huawei
Model : HRY-LX1
Version : 9.1.0
Problem : FRP

Solution : Downgrade using the flash file below
Steps:
Susi : OarYUmpLULP5sTg3LNUXutWqV4XlTta9AzyZZzSTk4Q

1. Download the File
2. Put into SDcard
3. name dload
4. turn off phone
5. press and hold vol+ and vol- and power
6. let go power after vibrate or in logo mode
7. wait until update process has finished

Hard Reset

1. turn off phone
2. Press and hold vol+ and power
3. Let go power after you see huawei logo
4. do hard reset
5. press safe mode

After boot up

1. Goo to setting
2. Enable developer mode
3. Reset all setting
4. Restart phone
5. Done FRP has gone
6. Dnt Forget to do factory reset after enable the OEM unlock

Sorry i dont have picture on it but this solution is realy working

Logs,

Welcome to Octoplus FRP Tool v.1.8.5.0
Platform: HUAWEI
Selected model: _TEST-MODE
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: HRY-LX1
SW version: HRY-LX1 9.1.0.280(C185E8R4P1)
Reset FRP operation is not supported for this firmware version
Operation was failed!
Performed by 1.8.5.0 Software version.

Platform: HUAWEI
Selected model: _TEST-MODE
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: HRY-LX1
SW version: HRY-LX1 9.1.0.262(C185E8R4P1)
Performed by 1.8.5.0 Software version.