REFERENCE Huawei MediaPad T3 7.0 (BG2-U01) FRP (FLASH via SD CARD)

[Davidzkie26]

History: Ayaw gumana sa CM2... Success naman sya pero ayaw parin ma remove ng FRP.. Kaya I decided na e Flash nlng. Hndi naman nabigo..


LINK: https://drive.google.com/file/d/1Zg5i0s6IMneXW_5Bdt62Y3gjYK_Ue2k3/view?usp=sharing

1. Extract firmware.
2. Copy "dload" folder on your sd card.
3. Power off your tablet.
4. Then press volume up + down & power button together.
5. When logo appears release power button only..
6. Hold still both volumes until the installing update appears then release it.
7. Wait til finish..

Finish product:

 

[j4m2_6]

History: Ayaw gumana sa CM2... Success naman sya pero ayaw parin ma remove ng FRP.. Kaya I decided na e Flash nlng. Hndi naman nabigo..


LINK: https://drive.google.com/file/d/1Zg5i0s6IMneXW_5Bdt62Y3gjYK_Ue2k3/view?usp=share_link

1. Extract firmware.
2. Copy "dload" folder on your sd card.
3. Power off your tablet.
4. Then press volume up + down & power button together.
5. When logo appears release power button only..
6. Hold still both volumes until the installing update appears then realease it.
7. Wait til finish..

Finish product:
View attachment 22296

You need access.. ? other link sir..

 

[Davidzkie26]

pa try ulit boss.. salamat

 

[Davidzkie26]

You need access.. ? other link sir..

na open na ba boss?? pa update aq salamat...

 

[j4m2_6]

na open na ba boss?? pa update aq salamat...

ok na po salamat..