REFERENCE HUAWEI MYA-L22 FRP DONE by MRT Dongle orig. post

[fertxter]

HUAWEI MYA-L22 FRP DONE by MRT Dongle

Procedure
OPEN MRT TOOLS
CLICK MTK SPECIAL TOOLS
CLICK FRP
CLICK EMMC_Flash_Init1
CLICK "START"
HOLD VOLUME DOWN
CONNECT USB...

logs

  [COLOR=#000000]Disconnect Mobile...
    Re-Put the Mobile Bettery...
    Then Connect your Phone to Computer again....
    Please Make sure Mobile better has Power...
>>> Searching Mobile Port...
    Get Mobile Port is:  COM38
>>> Device driver identification:
    MediaTek USB Port
>>> Mobile Has Connect...
    CPU_NAME: MT6735
>>> Reading Mobile Hardware Info...Success
    HW_Inf:  8A00    SW_Inf:  CA00
>>> Initialization Mobile ...Success
>>> Downloading Boot1 To Mobile Phone...Success
    The Flash Hardware Info:JHAG4a
>>> Downloading Boot2 To Mobile Phone...
>>> Initializationing Mobile Hardware Parameter...Success
    =====================Flash Type(eMMC)==============
    Flash   Size: 0x00000003AB400000 -> 15028M
    Flash     ID: 0x90014A4841473461
    Flash   Name: Hynix_Unknow
    Flash symbol: JHAG4a
>>> Software Auto Switch Hight Speed Has Enable...
>>> Swich Mobile to Hight Speed Re\Wr Port...
    Get Mobile Port is:  COM35
>>> Device driver identification:
    MediaTek DA USB VCOM (Android)
>>> Reading Mobile Map Data...Success
>>> Software Auto Switch Hight Speed Has Enable...
>>> Swich Mobile to Hight Speed Re\Wr Port...
    Get Mobile Port is:  COM35
>>> Device driver identification:
    MediaTek DA USB VCOM (Android)
>>> Reading Mobile Map Data...Success
>>> Extracting valid data from partition data...
>>>>Formating Mobile USER Data...
    ADD(HEX):0x0018200000    Size(HEX):0x0000100000   
    Corresponding operation completed!![/COLOR]!

Finish Product

​