Huawei Y220 Hang on Logo Done

[RasNuJ]

Hi,

May tanggap po ako... Huawei Y220 Hang on logo..

Search ako dito wala pa naka try...

So gamit ang nck box natin download lang po tayo ng firmware.sa support...

Y220 U10 yun akin...

Sa software open natin ung android mtk flasher

Select ng tamang unit...

After nun select sca file... ung firmware na nakuha natin..

Then click Write Flash...

Ung sa akin una may error ito ung logs

Flash files count is :9
 Action : Firmware update.
 Selected Huawei: Ascend Y220-U10
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : PreLoader USB VCOM Port (COM14)
 Phone detected...Please wait
 Sending DA agent, please wait...
 BBCHIP MT6572_S00
 NAND: (4Gb+2048Mb) Unnamed Flash 
 BOOT STYLE : NAND BOOT
 Detecting high speed port, wait......
 Detected : DA USB VCOM Port (COM65)
 Start dumping nvram, wait.......
 Saved to : C:\NCK Box\NCK Box Android MTK Flasher\backup\y220_08_23_2014_16_46_55
 FORMAT NAND FLASH :  BEGIN:0x10740000       - LEN:0x1f580000      
 Error FlashTool: Invalid begging and end addresses are given for read operation on Flash. Please check your start address and length again.
 Error: S_DA_INVALID_RANGE
[B][COLOR="#FF0000"] Warning: S_DA_INVALID_RANGE
 Error FlashTool Download: S_SECURITY_INVALID_PROJECT[/COLOR][/B]

Sablay kahit anong try ko same error pa din

Ito solution

Un check natin ung Enable Format before Flash

Then click write flash uli...

Ito na ngayon ang logs

Flash files count is :9
 Action : Firmware update.
 Selected Huawei: Ascend Y220-U10
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : PreLoader USB VCOM Port (COM14)
 Phone detected...Please wait
 Sending DA agent, please wait...
 BBCHIP MT6572_S00
 NAND: (4Gb+2048Mb) Unnamed Flash 
 BOOT STYLE : NAND BOOT
 Detecting high speed port, wait......
 Detected : DA USB VCOM Port (COM65)
 Start dumping nvram, wait.......
 Saved to : C:\NCK Box\NCK Box Android MTK Flasher\backup\y220_08_23_2014_16_48_29
 Send preloader...
 Download firmware to flash now...
 UBOOT checksum is executing ...
 BOOTIMG checksum is executing ...
 RECOVERY checksum is executing ...
 SEC_RO checksum is executing ...
 LOGO checksum is executing ...
 ANDROID checksum is executing ...
 USRDATA checksum is executing ...
 Wait untill phone will start charging.

Working na unit...sensya na wala screenshot....