huawei y541-u02 monkey infected done by cm2

[kian12]

gd eve mga boss share ko lng huawei y541-u02 virus infected dami pumapasok ng mga apps pag mgconnect ng wifi at data...kaya maghahang ang unit...

first ; hanap firmware search dito serach doon..at ayun may nakita dn...kaya flash n agad..ang iba rd tools ang ginagamit kaso takot n ako mg flash ng rd tools kasi kdalasan g error lahat ng nflash ko dati s rd puro failed paktay lahat unit...kaya decide n ako s cm2 tirahain..wala p ako nkakita n cm2 ang gamit s pgflash nitong unit eh...kaya lakas loob kona tinira ni cm2..ayun sapol nmn..

ito settings s cm2 ; select (sp sc77xx)

ito logs..;


Operation : Flash [ v1.17 ]

======= Flash
Files set for flashing :
[ MCU ] : Y541-U02V100R001C567B105.pac
CRVersion : BP_R1.0.0
PacCPUinfo : SC7731_2341A
PacVersion : Y541-U02V100R001C567B105
File : fdl1-sign.bin
File : fdl2-sign.bin
File : nvitem_efuse.bin
File : nvitem_wcn.bin
File : u-boot-spl-16k-sign.bin
File : SC7702_sc7731g_y560_efuse_AsiaPacific-sign.bin
File : DSP_DM_G2-sign.bin
File : SC8800G_x30g_wcn_dts_modem-sign.bin
File : boot-sign.img
File : recovery-sign.img
File : system.img
File : userdata.img
File : boot_logo.bmp
File : boot_logo.bmp
File : sysinfo.img
File : custom_SPC_SEA.img
File : prodnv.img
File : cache.img
File : u-boot-sign.bin
File : dlstat.bin
File : globalinfo.img

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 15 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
PMTManager : Load 0x1B records
PMTManager : PMT Update Ok!
Flashing now

[FlashProc] : ERASE
Current ID : ERASEUBOOT
Current Part : uboot
[FlashProc] : Ok!

[FlashProc] : ERASE
Current ID : ERASEDLSTAT
Current Part : dlstat
[FlashProc] : Ok!

[FlashProc] : BOOTCODE
Current ID : SPLLOADER
Current File : u-boot-spl-16k-sign.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : MODEM_W
Current File : SC7702_sc7731g_y560_efuse_AsiaPacific-sign.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : DSP_W
Current File : DSP_DM_G2-sign.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : MODEM_WCN
Current File : SC8800G_x30g_wcn_dts_modem-sign.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : BOOT
Current File : boot-sign.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : RECOVERY
Current File : recovery-sign.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : SYSTEM
Current File : system.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : USERDATA
Current File : userdata.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : BOOTLOGO
Current File : boot_logo.bmp
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : FASTBOOT_LOGO
Current File : boot_logo.bmp
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : SYSINFO
Current File : sysinfo.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : CUSTOM
Current File : custom_SPC_SEA.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : ERASE
Current ID : FLASH
Current Part : wruntimenv1
[FlashProc] : Ok!

[FlashProc] : ERASE
Current ID : FLASH_WCN
Current Part : wcnruntimenv1
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : PRODNV
Current File : prodnv.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : CACHE
Current File : cache.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : ERASE
Current ID : ERASEMISC
Current Part : misc
[FlashProc] : Ok!

[FlashProc] : BOOTCODE
Current ID : UBOOTLOADER
Current File : u-boot-sign.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : DLSTAT
Current File : dlstat.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : GLOBALINFO
Current File : globalinfo.img
Flashing now ...
[FlashProc] : Ok!


Elapsed: 00:07:08

Reconnect Power/Cable!

done;...

wla n pic. s unit ngmamadali eh...

ito firmware n ginamit ko credits to owner s file;..

https://docs.google.com/uc?id=0Bzx93xQeMB7RY2pQZkRjVDhfeTA&export=download

 

[GAMBIT]

galing mo boss salamat sa pagbahagi mo

 

[Edzzz11]

nice sharing boss ..wla ba pass to boss tia...

 

[jhunzkie]

mabuti na lng nakita ko tong tuts na to,,nakakaloko talaga ang RD, salamat sa pagbahagi boss