REFERENCE Huawei Y6 Pro 2018 ATU-L22 Boot Problem Fix

[jexanvil]

History : Unit Wont turn On to system , but goes to recovery mode


Steps :
Flash Huawei stock Firmware Via Recovery Mode
Requirements: Your Huawei Smartphone or tablet should have atleast 20-30 percent of battery to perform the flashing process and a Micro SD Card (must).

Flash Stock firmware on Huawei Smartphone (Micor SD Card Update)

Step 1: Create a new folder on your Micro SD Card and rename it to dload.

Step 2: Download and extract Huawei Smartphone firmware (for your device) on your Computer.

Step 3: Now Copy UPDATE.APP and paste it the dload folder on your Micro SD card.

Step 4: Now Power Off your Huawei Smartphone.

Step 5: Now, Press Volume UP, Volume Down and Power Button at the same time for 5-8 seconds until the update process is started automatically.

Step 6: Update Process may takes 5-10 minutes to complete.

Step 7: Once Update Process is completed your device will reboot automatically and ready to use.

===========> Update.zip <============ Password Reported

Credits to the owner of this thread : Link

For FRP Problem i used Octoplus FRP Tool
Steps:
Device Vendor : HUAWEI
Device Model : ATU-L22
Put the phone to Fastboot Mode
Remove SD cards or sim ,
Power Off
Press and hold Vol down (-) and insert USB cable
then Reset FRP

Proofs / Refer to the images below :

Please Hit Like , Salamat..

 

[tor12]

boss meron kapa link nito needed ko kase may tanggap brick

 

[mastersoft]

update link please

 

[mastersoft]

corupted po sir

 

[xspeices09]

corupted po sir

Updated na boss

 

[mastersoft]

Updated na boss

corupted sa extract idol

 

[preciousgift26]

need ko po mga boss ang Password nito

 

[Erwin2425]

Passoword pabulong boss

 

[kimbryce25]

need password mga boss thanks

 

[johary27]

PA bulong sa password