WELCOME!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

DOWNLOAD HUAWEI Y6 PRO 2019 MRD-LX2 FRP PROBLEM DONE VIA SPFLASH TOOL WITH FRP FILE

Online statistics

Members online
2
Guests online
458
Total visitors
460

jofskie bartolata

Premium Account
Joined
Sep 19, 2019
Messages
524
PROCEDURE:
https://devdrive.cloud/aeb05607eda9b791/Huawei_Y6_2019_(MRD-LX1F)_FRP_File.ra...
1. Remove the back cover of the unit then remove the battery flex connector.
2. Open spflashtoll and load the file and uncheck the all box then go to format then select manual format flash then copy BEGIN ADRESS [HEX] file and FORMAT LENGHT[HEX] and paste after that click start and short to ground the TP using twizer and plug the usb cable wait until done and enjoy.


GwSl8Yz.jpg


IncMaFe.png


aft1hKW.png


M3lzsuH.png


MXgY9WB.png


3xkVIH7.jpg


rP505z4.jpg
 
bakit ayaw sakin boss..hanggang detect lang..ayaw mag run
baka mali po ang procedure mo idol. seguradohin mo idol na tama po yung pag load mo sa sp flash tool at dapat naka remove ang battery tapos click mo download at TP ka short to ground at salpak ang usb cable at hintayin mo seconds lang yan idol.
 
dapat walang check yung load sa scatter file at punta ka sa format at select mo manual at kailangan mo itype yan idol ang file ang BEGIN ADDRES AT FORMAT LENGTH etype mo yan.
 
baka mali po ang procedure mo idol. seguradohin mo idol na tama po yung pag load mo sa sp flash tool at dapat naka remove ang battery tapos click mo download at TP ka short to ground at salpak ang usb cable at hintayin mo seconds lang yan idol.
na follow ko lahat boss..tama lahat..naka 3x check ko..hehehe..

pero done na boss..palit pc lang pala..sa laptop ko na dali..ayaw sa pc ko..

btw...maraming salamat sa post mo..laking tulong..
 
Back
Top