- Joined
- Sep 19, 2019
- Messages
- 524
PROCEDURE:
https://devdrive.cloud/aeb05607eda9b791/Huawei_Y6_2019_(MRD-LX1F)_FRP_File.ra...
1. Remove the back cover of the unit then remove the battery flex connector.
2. Open spflashtoll and load the file and uncheck the all box then go to format then select manual format flash then copy BEGIN ADRESS [HEX] file and FORMAT LENGHT[HEX] and paste after that click start and short to ground the TP using twizer and plug the usb cable wait until done and enjoy.
https://devdrive.cloud/aeb05607eda9b791/Huawei_Y6_2019_(MRD-LX1F)_FRP_File.ra...
1. Remove the back cover of the unit then remove the battery flex connector.
2. Open spflashtoll and load the file and uncheck the all box then go to format then select manual format flash then copy BEGIN ADRESS [HEX] file and FORMAT LENGHT[HEX] and paste after that click start and short to ground the TP using twizer and plug the usb cable wait until done and enjoy.






