- Joined
- Jan 18, 2019
- Messages
- 57
Share ko lang po mga boss. Huawei Y7a
issue : No Power after mahulog.
Procedure:
1.Check first the main board if there is a broken ic or broken capacitors.
2. use your Dc Power supply/Digital tester etc. (kung ano meron kayo panokat.) to check if there is a leak on PCB board.
3.apply some smoke rosin/freezer spray to see directly if there is a shorted components.
4.REMOVE/REPLACE Damage ic/capacitors.
5. then test/try it.
pag may ganito kayo tanggap na unit check nyo agad VCC main capacitor yan yung ilang ulit ko na tenitest. may beeping sa tester. at low resistance.



issue : No Power after mahulog.
Procedure:
1.Check first the main board if there is a broken ic or broken capacitors.
2. use your Dc Power supply/Digital tester etc. (kung ano meron kayo panokat.) to check if there is a leak on PCB board.
3.apply some smoke rosin/freezer spray to see directly if there is a shorted components.
4.REMOVE/REPLACE Damage ic/capacitors.
5. then test/try it.
pag may ganito kayo tanggap na unit check nyo agad VCC main capacitor yan yung ilang ulit ko na tenitest. may beeping sa tester. at low resistance.


