WELCOME!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

DOWNLOAD Huawei Y9 Prime 2019 STK L22 Downgrade FRP Remove Done

Online statistics

Members online
1
Guests online
298
Total visitors
299

Winsam

Moderator
Staff member
Joined
Sep 1, 2016
Messages
1,863
Huawei Y9 Prime 2019 STK L22 Downgrade FRP Remove Done

ZGgQ829.jpg


Jx3v0Oh.jpg


fOezghI.jpg


VHL9BCC.jpg


ShkGgkY.jpg


Link >>>>>>CLICK ME<<<<<<<<<

PASSWORD:- tpmediahub

-Once you download the firmware in your PC Successfully, just extract the file.

-Connect “SD CARD” in your PC.

-Copy “dload” folder from your firmware, and then past into your SD CARD Root folder.

Note: Make sure your SD CARD is minimum 8GB and it has FAT32 file system, if the SD Card is not FAT32, then Format SD CARD to FAT32, before formatting make sure you have saved your data.

-Now insert SD CARD in your device to Bypass FRP HUAWEI Y9, HUAWEI Y9 Prime.

Let’s Put Device into Update Mode:

-Press and hold (Volume UP + Volume Down + Power) keys together.

-Keep Pressing all keys together.

-Release only “Power Key” once you see HUAWEI Logo on your screen, but keep pressing both volume keys.

-Release both volume keys after you see “EMUI” logo on your screen.

-Perfect, now we have successfully put our device into “Update Mode”, now the device will automatically receive all necessary updates from the dload folder.

-It will take several minutes in installing updates to Bypass FRP HUAWEI Y9, HUAWEI Y9 Prime.

-Once the update installation finish, the device will auto restart.

-The device will also take several minute on “HUAWEI” logo, so just keep patience.

-After that, you will have “Welcome” screen.

-Now put your device into “Recovery Mode”.

-Turn off your device.

-Long Press (Volume UP + Power Key) together.

-Release only (Power Key) once you see “HUAWEI” logo, in the meanwhile keep pressing (Volume UP) key.

-After 4-5 seconds, release also (Volume UP) key.

-After that you will successfully enter into recovery mode.

-To Bypass FRP HUAWEI Y9/Y9 Prime, we have to format our device, so you will precisely lose your data.

-Tap on “Wipe Data/Factory Reset”.

-Type “YES” and then again tap on “Wipe Data/Factory Reset”..

-Again tap on “Wipe Data/Factory Reset”.
-Once the Data/Factory Reset process finish, your device will automatically reboot.

-Congrats, you are done to Bypass FRP HUAWEI Y9, HUAWEI Y9 Prime (EMUI 9.1.0)


 
Last edited by a moderator:
maraming salamat po dito,tested talaga.nong una akala ko ayaw magupdate ang unit sa memory card.yun pala dahil lowbat.6% lang battery.buti di agad binalikan ng tumer naicharge ko pa.pag try ko uli pumasok na sa update...
 
bakit sa akin tuloy naman sa pag update tapos factory reset tapos safe mode na,,ayaw mag direct sa menu kahit naka safe mode na para maka punta na sana ako sa settings para ma reset ulit
 
Back
Top