i9300 imei null done(himala o tsamba) [REFERENCE]...
mga amo share ko lang i9300
hung on logo
search ako pwede raw madali sa rooting pero no luck
hang parin sa start up
DL ako sa support ng z3x itongfile na to
I9300TDUBLH1_I9300TTELBLH1_2 mahigit 1gig ang download
ng matapos flash ko sa ODIN wit PIT.file GT-I9300_mx_20120329.pit
at PDA I9300TDUBLH1_I9300TTELBLH1
completo nman ang program walang error
problema nag NULL imei
so kinabahan na ako
naisip ko octopus
ayaw naman madetect
kahit nakaset na usb debug
kaya ginawa ko root
open odin
*PIT=GT-I9300_mx_20120329.pit
*PDA=CF-Root-SGS3-v6.4
completo
set ko uli
usb debug
type ang *#7284#=UART.mpdem usb PDA
type uli *#9090# set speed =115200
at isalpak ang usb
aba detected na
punta sa android EFS manager tab pindot
REPAIR EFS
pag check ko
0044++/+++++ imei
kaya naisip ko sa octopus parin repair IMEI/SN
inuna ko muna SN fix
buksan ang likod tanggalin ang battery at makikita nyo dun un SN
something RV1C64 basta nasa ibaba sya ng imei
at ito bumalik SN nya
punta naman sa imei repair type ang original imei na nasa likod din at pindot imei fix
my pop up na
After phone being rebooted and powered on perform the following
steps:
1. Disconnect USB cable.
2. Go to dial window.
3. Enter *#9090# number.
4. Set speed to 115200.
5. Connect phone via UART cable to Box.
need mu salpak ang micro uart o cable ng c3303 rj45
at hinatyin matapos
Platform: Samsung Android
Selected port: COM18
Selected model: GT-I9300
Searching for a phone. Please wait...
Phone found.
Firmware compiled date: Wed Aug 1 15:45:54 KST 2012
Phone SN: 00000000000
Android version: 4.0.4 (IMM76D)
Old IMEI: Unknown
New IMEI: 353718-05-767052-3
Erasing old IMEI. It can take some time. Please wait...
Creating NVM backup
Backup saved as C:\Program Files\GsmServer\OctopusSamsung
\BACKUP\NVDATA-GT-I9300-10-03-2013_18-29-13-.nvm file
Old IMEI was erased successfully.
Phone will restart now
After phone being rebooted and powered on perform the following
steps:
1. Disconnect USB cable.
2. Go to dial window.
3. Enter *#9090# number.
4. Set speed to 115200.
5. Connect phone via UART cable to Box.
Connecting to phone, please wait...
Phone connected successfully
Deactivating MSL...
MSL deactivate successfully
Writing new phone IMEI...
New IMEI successfully written.
Please, restart the phone to apply changes
ito na sya
mga amo share ko lang i9300
hung on logo
search ako pwede raw madali sa rooting pero no luck
hang parin sa start up
DL ako sa support ng z3x itongfile na to
I9300TDUBLH1_I9300TTELBLH1_2 mahigit 1gig ang download
ng matapos flash ko sa ODIN wit PIT.file GT-I9300_mx_20120329.pit
at PDA I9300TDUBLH1_I9300TTELBLH1
completo nman ang program walang error
problema nag NULL imei
so kinabahan na ako
naisip ko octopus
ayaw naman madetect
kahit nakaset na usb debug
kaya ginawa ko root
open odin
*PIT=GT-I9300_mx_20120329.pit
*PDA=CF-Root-SGS3-v6.4
completo
set ko uli
usb debug
type ang *#7284#=UART.mpdem usb PDA
type uli *#9090# set speed =115200
at isalpak ang usb
aba detected na
punta sa android EFS manager tab pindot
REPAIR EFS
pag check ko
kaya naisip ko sa octopus parin repair IMEI/SN
inuna ko muna SN fix
buksan ang likod tanggalin ang battery at makikita nyo dun un SN
something RV1C64 basta nasa ibaba sya ng imei
at ito bumalik SN nya
punta naman sa imei repair type ang original imei na nasa likod din at pindot imei fix
my pop up na
After phone being rebooted and powered on perform the following
steps:
1. Disconnect USB cable.
2. Go to dial window.
3. Enter *#9090# number.
4. Set speed to 115200.
5. Connect phone via UART cable to Box.
need mu salpak ang micro uart o cable ng c3303 rj45
at hinatyin matapos
Platform: Samsung Android
Selected port: COM18
Selected model: GT-I9300
Searching for a phone. Please wait...
Phone found.
Firmware compiled date: Wed Aug 1 15:45:54 KST 2012
Phone SN: 00000000000
Android version: 4.0.4 (IMM76D)
Old IMEI: Unknown
New IMEI: 353718-05-767052-3
Erasing old IMEI. It can take some time. Please wait...
Creating NVM backup
Backup saved as C:\Program Files\GsmServer\OctopusSamsung
\BACKUP\NVDATA-GT-I9300-10-03-2013_18-29-13-.nvm file
Old IMEI was erased successfully.
Phone will restart now
After phone being rebooted and powered on perform the following
steps:
1. Disconnect USB cable.
2. Go to dial window.
3. Enter *#9090# number.
4. Set speed to 115200.
5. Connect phone via UART cable to Box.
Connecting to phone, please wait...
Phone connected successfully
Deactivating MSL...
MSL deactivate successfully
Writing new phone IMEI...
New IMEI successfully written.
Please, restart the phone to apply changes
ito na sya