Instructions:
1. Place phone in download mode.
2.If needed, install latest Samsung USB drivers by installing Samsung Kies: http://www.samsung.com/us/kies
3. Open Odin exe.
4. If phone is detected, the window under ID:COM will turn yellow.
5. Click on "PIT" to browse to and select infuse_gb.pit. Make sure that Re-Partition is selected.
6. Click on "PDA" to browse to and select PDA_UCLB3.tar.md5.
7. Click on "PHONE" to browse to and select PHONE_UCLB3.tar.md5.
8. Click on "Start", and allow Odin to flash the phone. Do not unplug or power off the phone until Odin is finished.
9. When the Odin dialogue reads "PASS!", the phone should reboot. Congrats, you've just successfully used the UCLB3 Unbrick.
1. Place phone in download mode.
2.If needed, install latest Samsung USB drivers by installing Samsung Kies: http://www.samsung.com/us/kies
3. Open Odin exe.
4. If phone is detected, the window under ID:COM will turn yellow.
5. Click on "PIT" to browse to and select infuse_gb.pit. Make sure that Re-Partition is selected.
6. Click on "PDA" to browse to and select PDA_UCLB3.tar.md5.
7. Click on "PHONE" to browse to and select PHONE_UCLB3.tar.md5.
8. Click on "Start", and allow Odin to flash the phone. Do not unplug or power off the phone until Odin is finished.
9. When the Odin dialogue reads "PASS!", the phone should reboot. Congrats, you've just successfully used the UCLB3 Unbrick.
