- Joined
- Apr 11, 2016
- Messages
- 75
Procedure:
1. Open a folder where you extarcted SP Flash Tool, launch "flash_tool.exe".
2. You may see a dialog: "The scatter file cannot found...", click "OK".
3. Select "Download" tab, then press "Scatter-loading" button.
4. Open a folder where you extracted firmware, select "MT****_Android_scatter.txt" file.
5. In the list REMOVE check marks from these blocks: PRELOADER, DSP_BL (if available).
6. Press "Download Agent" button, open SP Flash Tool folder, select "DA_A3B1.bin".
7. Press "Download" button, connect your turned-off tablet to PC.
8. Process may take up to 15 minutes depending on transfer speeds.
9. If everything will be successful, you will see a dialog with green circle and check mark. Close it and disconnect your tablet.
10. Close SP Flash Tool.
11. Charge your tablet for 5 minutes. This is important, because this is how you will restart a battery controller after flashing.
12. Boot your tablet. Startup right after a flashing may take up to 10 minutes.
Firmware Link: https://mega.nz/#F!34QQ1Y6C!cE0Q-VsDuvNTDwE238lRYA!r9oERKbL
1. Open a folder where you extarcted SP Flash Tool, launch "flash_tool.exe".
2. You may see a dialog: "The scatter file cannot found...", click "OK".
3. Select "Download" tab, then press "Scatter-loading" button.
4. Open a folder where you extracted firmware, select "MT****_Android_scatter.txt" file.
5. In the list REMOVE check marks from these blocks: PRELOADER, DSP_BL (if available).
6. Press "Download Agent" button, open SP Flash Tool folder, select "DA_A3B1.bin".
7. Press "Download" button, connect your turned-off tablet to PC.
8. Process may take up to 15 minutes depending on transfer speeds.
9. If everything will be successful, you will see a dialog with green circle and check mark. Close it and disconnect your tablet.
10. Close SP Flash Tool.
11. Charge your tablet for 5 minutes. This is important, because this is how you will restart a battery controller after flashing.
12. Boot your tablet. Startup right after a flashing may take up to 10 minutes.
Firmware Link: https://mega.nz/#F!34QQ1Y6C!cE0Q-VsDuvNTDwE238lRYA!r9oERKbL
