Infinix X688B Frp Done via UMT MTK

[EJSCriminal]

Infinix Hot 10 Play X688B

Tools needed:

1. UMT Dongle
2. USB Data Cable

Procedure:

1. Open UMT MTK
2. Select MTK One Click
3. Check Reset FRP
4. Turn off the phone
5. Press and hold v-, v+
6. Insert USB Data Cable

Logs:

Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM9 [MediaTek USB Port_V1632 (COM9)]
Device Path: \\?\usb#vid_0e8d&pid_0003#5&2f3fe3a6&0&3#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0766, [MT6765] [Helio P35/G35]
Hardware Info: 0x8A00, 0xCA00, 0x00
Config : [SecureBoot: True] [SLA: False] [DA Auth: True]
MEID: 9DE3D03D3755379A70FBD456E746DFA8
Preparing device...
-- Success!
Preloader saved as : preloader_x688b_h659_220117_124051.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port_V1632 (COM9)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Information...
Platform : MT6765
Board : Infinix-X688B
Platform : mt6765
Userdata is ENCRYPTED
Seeking FRP Data...
Resetting FRP...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.8]

Done.
​