DOWNLOAD iphone 6s plus clone model- A1687 MT6582 hang on logo done with tested fw.

[acetech05]

mga boss share ko lang itong gawa ko iphone 6s plus clone model- A1687 MT6582
hang on logo done sa tested firmware.
history. na virus daw nag dadownload ng kusa ang mga app. kaya ne reset ni tumer yung nag hang
nalang kaya hanap ako na firmware dito sa ating tahanan. kaya lang walang feedback kung tested
kaya patutunayan natin kung tested talaga ito. back up muna sa miracle para iwas abuno. nabac up naman
kaya download na ng firmware.
ito pala likod ng unit.

-====firmware====-
http://www.mediafire.com/file/ecvy1pe35y2tc9f/iphone+6s+plus+clone+model-+A1687.rar
after download.proceed for flashing.

done.
thanks for viewing mga ka ant.
sorry walang password ang firmware di naman nilagyan ng owner.
thanks kay boss:destroyer_11 tested yung firmware nya.
hits thanks nalang mga ka ANT TECH.
-====alright====-
:-bd​

 

[CODENAME]

keep it up

 

[khai]

kaya dahil jan c.o. acetech08. nagpapasalamat ako. kaya ipagpatuloy mo lang ang pagbahagi. kaya magpapasalamat din ako sa orig ts. kaya para sa inyo thumbs up talaga ako.. kaya idol ko kayo eh..​

 

[jhong48]

ayos yan boss,,,

 

[DEEtech]

ty for sharing boss

 

[acetech05]

kaya dahil jan c.o. acetech08. nagpapasalamat ako. kaya ipagpatuloy mo lang ang pagbahagi. kaya magpapasalamat din ako sa orig ts. kaya para sa inyo thumbs up talaga ako.. kaya idol ko kayo eh..​

thanks moderator khai.

 

[rdctel23]

unit: iphone 6s plus MT6582
problem: hang
action taken: flash using nck and sptools
status: nag open na sa menu.... kaya lang po invalid imei...
pero kapag type ko *#06# lumalabas naman serial number nya

Action : Boot Info.
Selected 0-By CPUM 0-By CPUMT6571_EMMC
Exe version: NCKDongle AndroidMTK 2.5.6.2
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM38)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6582_S01
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (57Gb+4096Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 29:00:00:00:00:00:00:00
EMMC CID: 8801034E436172 : 000000000000000000
EMMC UA SIZE: 0x1ce100000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1ced00000 [7.231 GB]
Partition table saved to: Android_MTK\partition_tables\
Wait untill phone will start charging.
All done.


saan po kaya ang problema nito.... any solution po....
Action : Boot Info.
Selected 0-By CPUM 0-By CPUMT6571_EMMC
Exe version: NCKDongle AndroidMTK 2.5.6.2
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM38)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6582_S01
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (57Gb+4096Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 29:00:00:00:00:00:00:00
EMMC CID: 8801034E436172 : 000000000000000000
EMMC UA SIZE: 0x1ce100000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1ced00000 [7.231 GB]
Partition table saved to: Android_MTK\partition_tables\
Wait untill phone will start charging.
All done.

cm2

Chinese Miracle II [MTK module] v 1.58

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 38 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 8801034E4361726420299500352843CF
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x88 , OEM : 0103
[eMMC] : FLASH_INF : [FORESEE] , draC
[eMMC] : FLASH_CID : 8801034E4361726420299500352843CF
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001CE100000
[eMMC] : FLASH_UCP : 7393 MiB [eMMC 8 GiB]
DEV RID : 0xD28A0F04BDAB106504F26BEC5C1252C3
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Done!
Elapsed: 00:00:04
Reconnect Power/Cable!

 

[bryan atega]

iphone 6s clone

maraming salamat boss acetech05 tested yong firmware na binigay mo kagagawa ko lang nagyon
sinsya walang ss nag mamadali kc si tumer ei.

 

[destroyer_11]

nadali mo boss....congrats po...

 

[ghino23]

sana mag conmpatible dito
Brand : APPLE
ProdName : 6s plus
ProdModel : 6s plus
Device : 6s plus
AndroidVer: 4.4
MTKxCPU : MT6582
MTKxPRJ : ALPS.JB5.MP.V1.13

 

[evt_mabalacat]

Salamat sa suporta mo sa ating tahanan pagpatuloy mo lang ang pagbabahagi ng iyong karunungan para lalo ka pang madaming matulungan more power sa iyo lodi