REFERENCE iPhone Remote Access Configuration Guide for Your DVR

[dyeyar]

Before you start make sure that the DVR is connected to your router and you router is connected to Internet (Connection is established by means of RJ45 Cat5e cable)

DVR Settings

There are many ways you can set your DVR, but In our opinion this is the simplest way forward.
Step 1

Go to: Main Manu--->Advanced ---> Network
Change Type from STATIC to DHCP click Apply and then Exit and Exit again. The DVR will restart now
Once DVR has restarted! Go to: Main Manu--->Advanced ---> Network
Check if IP address and Gateway has changed and enter new details below



It should looks like this



If the address did not change.
DVR is not connected to router(please make sure Cat5e cable is plugged in)
Router DHCP server setting are not set to default ( press reset button on the router)

Step 2

Go to : Main Manu--->Advanced --->Mobile
Please make a note of:



It should looks like this



Note:You will be able to change the password and user settings but this is not covered in this manual

Router Settings

You will need

Have access to a PC connected to you router.
Router user name and passwords (if not changed this is printed on the back of you router)
Note: All routers are different, but they have similar in this tool we have use.


PC tasks

Go to internet browser ( IE, Mozilla, chrome or any other..) and enter following IP number into to web address field

192.168.1.1 or 192.168.0.1

this should take you to Router Login page: (Virgin Media Router, Link Router, BT router Respectively



Login (Virgin Media Router, Link Router, BT router Respectively)


Select advance settings(Virgin Media Router, Link Router, BT router Respectively)



Port forwarding or option (this settings section may also be called: Virtual Servers, Network Address Translation (NAT), Demilitarized Zone (DMZ) Servers, Pinhole; Application and Firewall)



Establish your public IP address





iPhone Phone Settings

Download free app called "KMEye" from App Store

Enter the following details


Interface should looks similar to this



Check the video tuts here
[YT]http://www.youtube.com/watch?v=2PaSE-FIQ5s&feature=player_embedded[/YT]