share ko lng mga boss samsung j106f frp dala ni tumer ni reset daw nya.
1st step;open z3x box
2nd step;select model click unlock tab
3rd step; click reset frp reactivation.
ito po logs:
UNLOCK INSTRUCTIONS:
1. Power on the phone.
2. Connect the phone to PC with USB cable.
3. Check Samsung modem in device manager, install drivers if needed.
4. Press 'Unlock' button for direct unlock or 'Read codes' to read security codes.
Operation: Reset FRP/React/EE
Selected model: SM-J106F
Software version: 31.5.1
Searching Samsung USB Flash interface... COM49 detected
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP lock... OK
Reset done
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'
Done with Samsung Tool PRO v.31.5.1
sana po mkatulong sa mga baguhan....
1st step;open z3x box
2nd step;select model click unlock tab
3rd step; click reset frp reactivation.
ito po logs:
UNLOCK INSTRUCTIONS:
1. Power on the phone.
2. Connect the phone to PC with USB cable.
3. Check Samsung modem in device manager, install drivers if needed.
4. Press 'Unlock' button for direct unlock or 'Read codes' to read security codes.
Operation: Reset FRP/React/EE
Selected model: SM-J106F
Software version: 31.5.1
Searching Samsung USB Flash interface... COM49 detected
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP lock... OK
Reset done
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'
Done with Samsung Tool PRO v.31.5.1
sana po mkatulong sa mga baguhan....