REFERENCE J250G No Recovery Mode, Hang on Logo, FRP Locked Done via Odin&UMT

[EJSCriminal]

J250G

Take note: Hindi ko makita yung exact firmware niya kasi ayaw na mag recovery mode pero pwede naman tingnan sa download mode kung ano ang binary niya.



TOOLS NEEDED:
1. Odin
2. UMT Dongle
3. USB Data Cable

Firmware:
https://samfw.com/firmware/SM-J250G/GLB/J250GDXS3ATI2

Procedure: (DOWNLOAD MODE)

1. Open Odin
2. Load AP, CP CSC
3. Connect USB Data Cable
4. Click Start





Logs:
​

<ID:0/019> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/019> Odin engine v(ID:3.1303)..
<ID:0/019> File analysis..
<ID:0/019> Total Binary size: 3815 M
<ID:0/019> SetupConnection..
<ID:0/019> Initialzation..
<ID:0/019> Set PIT file..
<ID:0/019> DO NOT TURN OFF TARGET!!
<ID:0/019> Get PIT for mapping..
<ID:0/019> Firmware update start..
<ID:0/019> NAND Write Start!!
<ID:0/019> SingleDownload.
<ID:0/019> boot.img
<ID:0/019> recovery.img
<ID:0/019> system.img.ext4
<ID:0/019> persist.img.ext4
<ID:0/019> userdata.img.ext4
<ID:0/019> modem.bin
<ID:0/019> Transmission Complete..
<ID:0/019> Now Writing.. Please wait about 2 minutes
<ID:0/019> Receive Response from boot-loader
<ID:0/019> adspso.bin
<ID:0/019> Transmission Complete..
<ID:0/019> Now Writing.. Please wait about 2 minutes
<ID:0/019> Receive Response from boot-loader
<ID:0/019> cache.img.ext4
<ID:0/019> hidden.img.ext4
<ID:0/019> RQT_CLOSE !!
<ID:0/019> RES OK !!
<ID:0/019> Removed!!
<ID:0/019> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/021> Added!!
<ID:0/021> Removed!!
<ID:0/021> Added!!
<ID:0/021> Removed!!
<ID:0/021> Added!!
<ID:0/021> Removed!!
<ID:0/021> Added!!
<ID:0/021> Removed!!
<ID:0/021> Added!!
<ID:0/021> Removed!!
<ID:0/021> Added!!
<ID:0/021> Removed!!

FRP Locked



Tools:

1. UMT DONGLE
2. USB Data Cable

Procedure: MTP MODE

1. Connect the cellphone in the internet.
2. Inset USB Data Cable
3. Open ULTIMATE SAMS
4. Click Tools
5. FRP BYPASS (MTP) / Open Youtube
6. Click Bypass


Logs:​

Model : Samsung
Operation : FRP Bypass [Open YouTube]
Searching for Phone...Found
Port: : COM21 : SAMSUNG Mobile USB Modem #9
Checking for Device...Found [Normal Mode]
Reading Phone Information...OK
Model: : SM-J250G
IMEI: : 353502090754829
Software: : J250GDXS3ATI2/J250GOLC3ASK1/J250GDXU3ASK1/J250GDXS3ATI2
Product : XTC
Open link on phone and continue bypass.
Elapsed Time 23:51
[UltimateSams v0.3]
Saved to Logs\220308_142351.log

After that: Proceed bypass, click view and search efrp.me then download technocare apk. Open Settings App
Note: Uncheck the device administrator and go to apps then disable the google account manager and google play services after that you may now install the technocare apk then after that go to account then add your google account. After you add the google account go to apps again and enable the google account manager and google play service then check the device administrator.

"Restart"





Done.

Sana makasunod kayo sa procedure ko hindi ko na kasi na picturan yung process ng pag bypass pero madali lang po yun basta alam ang basic.


​

 

[JGD]

salamat sa maganda mong Procedure boss