@FullFlash
Grand Master baka makatulong po ito sayo
https://mega.nz/#!PpRVzKaa!K3GK2e23nOAbtuHaEj-NIyqqYstYtiPcjNnWJeyG9js
EXYNOS MULTI-FUNCTION TAB
T - MOBILE APP UNLCOK
1.ROOT DEVICE
2.CLICK BUTTON PERFORM TASK
(WORKS FOR NOTE 5, S6, S6 EDGE,
J700T / T1, G550T / T1 / T2, S6 +)
MSL RESET/ UNLCOK
FLASH COMBO MODEM IF ON
PATCHED BASEBAND SEARCH COM
PORT SELECT MODEM PORT CLICK
BUTTON PERFORM TASK NO NEED
TO REBOOT
MSL RESET
ROOT IS REQURIED THIS WILL WIPE
MSL, CLICK BUTTON PERFORM TASK
MUST REBOOT THEN DO CERT WRITE
NEW SEC MSL RESET
FOR S8, NOTE 8, G570M ETC NEW
SECURITY EXYNOS MODELS, PHONE
MUST BE ON COMBO OR PERMISSIVE
TO CHECK ADB SHELL GETENFORCE,
CLICK BUTTON PERFORM TASK, DO
NOT REBOOT, OR WILL HAVE REDO
PROCESS
CERT WRITE MODEM
1.SEARCH COM PORTS SELECT MODEM
2.CLICK BUTTON PERFORM TASK
CERT WRITE ADB
1.ROOT OR PERMISSIVE IS REQURIED
2.CLICK BUTTON PERFORM TASK
CERT WRITE MSL/ AKSEED
1.SEARCH COM PORT USE THIS
FUNCTION ONLY IF AKSEENDO
AND MSL HAVE BEEN SENT
(ADVANCED PROCESS USE OTHER
FUNCTIONS FIRST)
BACKUP DRK
ROOT REQURIED TO BACKUP PHONES
ORIGINAL DRK - THIS WILL MATCH
ONLY TO THIS PHONE
RESTORE DRK
ROOT REQURIED THIS WILL RESTORE
THE DRK PREVIOUSLY BACKED UP
------------------------------
QUALCOMM MULTI FUNCTION TAB
RESET MSL ADB- ROOT REQURIED THIS WILL WIPE IMEI TO ZERO AND DEFAULT MSL
RESET MSL / UNLCOK - SEARCH COM PORTS SELECT SERIAL CHECK BASEBAND TO SEE IF NEED TO DOWNGRADE MODEM FOR THIS FUNCTION
NEW QC WIPE - ROOT OR PERMISSIVE REQUIRED THIS WILL WORK ON S8 S7 NOTE 8 ALL NEW SEC MODELS WILL UNLCOK IN PROCESS
CERT WRITE ADB - ROOT IS REQURIED FOR NEWER BASEBANDS- 4.4.2 4.4.4 5.0 SOME 5.1.1 NO ROOT REQURIED
ENABLE AT OVER MODEM PORT - THIS WILL ALLOW QUALCOMM DEVICE TO BE WRITTEN OVER MODEM PORT LIKE EXYNOS DEVICE
G93X QC UNLCOK - SUPPLIED FILES MUST BE FLASHED, TWO STEP PROCESS ONCE DEVICE RUN FIRST STEP AND REBOOT MAKE SURE TO ALLOW TO CONENCT ADB TWO TIMES TO CUT DOWN ERROR IN PROCESS
RESTORE G93X QC UNLOCK - WILL RESTORE DEVICE TO STATE BEFORE FAILED ATTEMPT OF G93X UNLCOK
SECRIL BYPASS - USE ON NEW SEC DEVICES THAT FAIL TO ALLOW CERT WRITE OR OTHER FUNCTIONS NEEDED
QC KNOX BYPASS - USE ON NOTE 4, S5 AND MANY OTHER QC MODEL TO SET KNOX 0 TO ALL MSL RESET / CERT WRITE
-------------------------------------------------------------------
SPRINT & VERIOZON MULTI FUNCTION TAB
SPRINT CERT WRITE
IGST 1 METHOD- NO NEED ROOT 5.1.1
AND LOWER BASEBAND
ALL 6.0 O.S VERSION AND ABOVE ROOT
IS REQUIRED
IGST 2 METHOD - USE ONLY ROOTED
DEVICE IF IGST1 METHOD FAIL
SPRINT UNLOCK (ROOT)
WILL CARRIER UNLOCK THE SPRINT
DEVICE
CHECK DEBLOAT BOX IF WANTING TO
REMOVE HANDS FREE AND OTHER
BLOATWARE **DO NOT USE THIS BOX ON
NOTE 4 OR S5, DEVICES THAT REQURIE
GCF**
CARRIER CHECK BOX- ENTER XAS, VZW,
TMB, BST OR CHOOSEN CARRIER TO SET
PROPERTIES OF DEVICES TO ALSO WILL
UNBRAND DEVICE *THIS WILL CAUSE A
FACTORY RESET OF DEVICE*
CARRIER CONFIG 64 BIT
SET CARRER CODES FROM ABOVE IN BOX USE
THIS ON S8 NOTE 8 MODELS TO SWITCH CARRIER
CODES, FLASH HOME. CSC TO APPLY CHANGES
SPRINT NEW SEC UNLOCK
APPLIES ON ALL NEW BASEBANDS THAT NEW
SECURITY IS IN PLACE WILL GET ERROR 4 IN REGULAR
UNLOCK EX. QJ3 BASEBAND S7
VERIZON CERT WRITE
NO ROOT IS REQUIRED TILL O.S 6.0 AND HIGHER
-----------------------
MSL UNLOCKING TAB
QUALCOMM MODELS - REQUIRE ROOT ENTER MSL IN BOX AND CLICK BUTTON PERFORM TASK
EXYNOS MODELS - SEARCH COM PORTS SELECT MODEM, ENTER MSL, CLICK BUTTON
(
