J
j4tech
Anonymous
Kh1800m hang on cyon logo and unlock done octopus box[Reference]
PROBLEM: HANG ON LOGO AND NEED TO UNLOCK
TOOLS: OCTOPUS BOX V1.8.6
(USB CABLE KH1200)
PROCEDURE: OPEN OCTOPUS SELECT MODEL KH1800M
DOWNLOAD FLASHFILE FROM SUPPORT(KW18M807_00.oct)
ADD FLASHFILE
NOTE: ITO IMPORTANTE DAPAT NAKA BOOT MODE. DITO AKO NATAGALAN AYAW BASAHIN HEHE ETO PALA BOOTMODE NG KH1800M (press "2" + "5" + Power ON keys.)
THEN CLICK WRITE FIRMWARE IMPORTANTE PO NAKA FULL CHARGE ANG BATTERY PARA IWAS ABERYA..
SCREENSHOT FLASHING:
FLASHING AND UNLOCK SUCCESS
logs:
Code:
------------- Platform: LG Qualcomm Selected port: COM20 Selected model: KH1800M Mode: Emergency ------------------------------------------------------------------- ------------- Please, make sure the phone's battery is fully charged. Disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs. To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Qualcomm-based devices). You should not run any other programs or attach new devices to your computer during the flashing! Please, follow these simple precautions to avoid damaging your phone. ------------------------------------------------------------------- ------------- Opening "KW18M807_00.oct"...OK Writing Firmware... Erasing EFS...OK Writing MIBIB...OK Writing QCSBL...OK Writing OEMSBL1...OK Writing OEMSBL2...OK Writing AMSS...OK Writing FAT...OK Writing EFS2...OK Phone startup...OK Repairing NVM...OK Writing Firmware done! Rebooting phone...
unlocking logs
-------------
Platform: LG Qualcomm
Selected port: COM20
Selected model: KH1800M
Mode: Normal
Phone model: KW18M807
SW Version: M6281A-KLVZ-4.0.9530T
IMEI: 354243-02-409575-2
Bluetooth address: 00:00:00:00:00:00
Prepairing loader...OK
Sending loader...OK
Searching signatures...
Signature #1...OK, not patched
Patching...
Signature #1...OK
Phone successfully unlocked!
Rebooting phone...
RESULT:
ayoss!!!
TOOLS: OCTOPUS BOX V1.8.6
(USB CABLE KH1200)
PROCEDURE: OPEN OCTOPUS SELECT MODEL KH1800M
DOWNLOAD FLASHFILE FROM SUPPORT(KW18M807_00.oct)
ADD FLASHFILE
NOTE: ITO IMPORTANTE DAPAT NAKA BOOT MODE. DITO AKO NATAGALAN AYAW BASAHIN HEHE ETO PALA BOOTMODE NG KH1800M (press "2" + "5" + Power ON keys.)
THEN CLICK WRITE FIRMWARE IMPORTANTE PO NAKA FULL CHARGE ANG BATTERY PARA IWAS ABERYA..
SCREENSHOT FLASHING:
FLASHING AND UNLOCK SUCCESS
logs:
Code:
------------- Platform: LG Qualcomm Selected port: COM20 Selected model: KH1800M Mode: Emergency ------------------------------------------------------------------- ------------- Please, make sure the phone's battery is fully charged. Disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs. To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Qualcomm-based devices). You should not run any other programs or attach new devices to your computer during the flashing! Please, follow these simple precautions to avoid damaging your phone. ------------------------------------------------------------------- ------------- Opening "KW18M807_00.oct"...OK Writing Firmware... Erasing EFS...OK Writing MIBIB...OK Writing QCSBL...OK Writing OEMSBL1...OK Writing OEMSBL2...OK Writing AMSS...OK Writing FAT...OK Writing EFS2...OK Phone startup...OK Repairing NVM...OK Writing Firmware done! Rebooting phone...
unlocking logs
-------------
Platform: LG Qualcomm
Selected port: COM20
Selected model: KH1800M
Mode: Normal
Phone model: KW18M807
SW Version: M6281A-KLVZ-4.0.9530T
IMEI: 354243-02-409575-2
Bluetooth address: 00:00:00:00:00:00
Prepairing loader...OK
Sending loader...OK
Searching signatures...
Signature #1...OK, not patched
Patching...
Signature #1...OK
Phone successfully unlocked!
Rebooting phone...
RESULT:
ayoss!!!