PROBLEM
HANG ON LOGO
MODEL
KingCom JOYPAD C81
1st attempt na ginawa ko wiping via RK Batch tool, success pero hang pa rin.
So i decided to flash...
Procedure & Tools:
Preliminary Step
Download the ICS 4.0.3 For Kingcom Joypad C81 Custom Firmware
Download and unpack RKDeviceManage
Shutdown/Turn off the tablet
Run RKDeviceManage.exe on your computer
Put Tablet In Recovery Mode
You need to put the device in recovery mode to download the firmware to the tablet with RKDeviceManage. Connect Kingcom Joypad C81 via USB while holding the M button and power button, RKDeviceManage should detect Kingcom Joypad C81
Sending The Firmware To The Tablet
In RKDeviceManage, browse and load the Custom Firmware file that you have prepared in the preliminary step
Push the Upgrade button to transfer the selected firmware to the tablet
The firmware will be copied to the tablet, a progression counter will go from 0% to 100% on this step, followed by a verification
When the transfer is done, let the tablet reboot and update itself. It should take a few minutes for the flash process to finish.
In case Kingcom Joypad C81 does not turn on automatically, use the device reset button (small hole located next to the power button)
Kingcom Joypad C81 Firmware
RKDeviceManager
FLASHING SUCCESS
DONE...
JUST A SIMPLE REFERRENCE
