Lenovo a536 invalid imei rebuild done

[PR1NCEJHOM]

SHARE KO LANG PO ITO MGA BOSS ITONG AKING NAGAWA LENOVO A536 PO INVALID IMEI...

CHECK KO BASEBAND NYA AT BUTI MERON NAMAN KAYA PROCEED NA AGAD TO REBUILD IMEI VIA CM2MTK... (l:0(l:0(l:0

--->

SEE LOG'S HERE


--->

START UP PHONE


--->

AND IT'S DONE (l:0(l:0(l:0


FOR REFERENCE LANG PO MGA LODI SANA PO NAKATULONG SA AKING KAANT(l:0(l:0(l:0


POWERED BY: PRINCEJHOMâ„¢@ANTGSM.COM
​

 

[yffar13]

boss bkt ung cm2 mtk ko wala nalabas na write security at ung box paglalagyan imei?

 

[ZOCHRALSKI]

TESTED

Wait for phone...
Phone found! [ 4 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004B3758564D42012B68EA073269
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMVX7
[eMMC] : FLASH_CID : 1501004B3758564D42012B68EA073269
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0x963C61FD0C45B2B77FB0CB3E719C8C70
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!



Set IMEI [00] : 86732202981
Set IMEI [01] : 86732202980
Prepare finished. Security check required!

Wait for phone...
Phone found! [ 4 ]
Sync...
Repair done!

Done!
Elapsed: 00:01:06
Reconnect Power/Cable!

 

[PR1NCEJHOM]

TESTED

Wait for phone...
Phone found! [ 4 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004B3758564D42012B68EA073269
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMVX7
[eMMC] : FLASH_CID : 1501004B3758564D42012B68EA073269
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0x963C61FD0C45B2B77FB0CB3E719C8C70
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!



Set IMEI [00] : 86732202981
Set IMEI [01] : 86732202980
Prepare finished. Security check required!

Wait for phone...
Phone found! [ 4 ]
Sync...
Repair done!

Done!
Elapsed: 00:01:06
Reconnect Power/Cable!

MARAMING SALAMAT PO SA FEEDBACK SMOD ZOCH (l:0