LG G Stylo aka LG LS770 frp

[1_dRick_tion]

1. put on download mode = press vol. + and insert USB cable
2. Reset FRP lock

Welcome to Octoplus/Octopus Box LG Software version 2.6.1
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM73
Selected model: LS770
Please, put the phone into download mode manually (Power phone OFF,
press and hold "Vol+" button and connect the cable (or P999 cable)).
Reading info...Failed!
Port busy
Initializing ADB...OK
Waiting for phone...
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging" option
6. Connect the cable and check, whether ADB interface has appeared in
PC Device Manager.
Performed by 2.6.1 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM115
Selected model: LS770
Please, put the phone into download mode manually (Power phone OFF,
press and hold "Vol+" button and connect the cable (or P999 cable)).
Reading info...
IMEI: 350305-26-000000-4
Android version: 5.1.1
Battery level: 21%
SW Version: LS770ZV5
Mode: Emergency
Initializing flash...OK
SW version: LS770ZV8_06
Android version: 6.0
LAF Version: 1.1
Product ID: CD27S151216000501
IMEI: 356434-07-213863-0
Target operator: SPR
Hardware: rev_10
Reading partitions...OK
Resetting FRP Lock...
Resetting FRP lock successfully completed!
Performed by 2.6.1 Software version.





br,

1_dRick_tion

I can accept failure, everyone fails at something. But i can't accept not trying.