LG GR500F restart ( DONE0 ..[Reference]
isa pa mga amo
LG GR500F
nakadale na naman ang pugita............
LG GR500F restart problem pag may sim card
ito procedure
1) open octopus LG tool
2) tick LG SEMC
3) select GR500F
4) load firmware
5) tick write firmware
6) sundan lang tong instruction na to
For correct working the battery must be fully charged!
Please, reconnect battery, press and hold camera button and connect USB cable.
If phone not connected, connect (solder) jumper according to picture ("Show testpoint" button).
note dapat full charge ang battery
pwede ring gumamit nang power supply
7) hintayin lang matapos ang flashing
ito po logs
Welcome to Octopus Box LG Software version 1.9.9
--------------------------------------------------------------------------------
Platform: LG SEMC
Selected port: COM9
Selected baudrate: 921600
Selected model: GR500F
Use Testpoint/Jumper: No
--------------------------------------------------------------------------------
For correct working the battery must be fully charged!
Please, reconnect battery, press and hold camera button and connect USB cable.
If phone not connected, connect (solder) jumper according to picture ("Show testpoint" button).
Starting...
Phone found!
Chip ID: 0xD9000401FFFFFFFF
Chipset: DB3200
BootROM mode detected
Sending ACC preloader...OK
Sending APP preloader...OK
CID: 54
IMEI: 359825-03-XXXXXX-5
Color: Red
Sending ACC production loader...OK
Sending APP production loader...OK
Reading Full flash...
Reading Full flash done!
Disconnected.
--------------------------------------------------------------------------------
Platform: LG SEMC
Selected port: COM9
Selected baudrate: 921600
Selected model: GR500F
Use Testpoint/Jumper: No
--------------------------------------------------------------------------------
For correct working the battery must be fully charged!
Please, reconnect battery, press and hold camera button and connect USB cable.
If phone not connected, connect (solder) jumper according to picture ("Show testpoint" button).
Starting...
Phone found!
Chip ID: 0xD9000401FFFFFFFF
Chipset: DB3200
BootROM mode detected
Sending ACC preloader...OK
Sending APP preloader...OK
CID: 54
IMEI: 359825-03-008023-5
Color: Red
Sending ACC production loader...OK
Sending APP production loader...OK
Reading APP GDFS...
Reading APP GDFS done!
Reading ACC GDFS...
Reading ACC GDFS done!
Disconnected.
--------------------------------------------------------------------------------
Platform: LG SEMC
Selected port: COM9
Selected baudrate: 921600
Selected model: GR500F
Use Testpoint/Jumper: No
--------------------------------------------------------------------------------
For correct working the battery must be fully charged!
Please, reconnect battery, press and hold camera button and connect USB cable.
If phone not connected, connect (solder) jumper according to picture ("Show testpoint" button).
Starting...
Phone found!
Chip ID: 0xD9000401FFFFFFFF
Chipset: DB3200
BootROM mode detected
Sending ACC preloader...OK
Sending APP preloader...OK
CID: 54
IMEI: 359825-03-XXXXXX-5
Color: Red
Sending ACC production loader...OK
Sending APP production loader...OK
Opening "GR500f-V10d-JUL-13-2009-TEL-AU.oct"...OK
Writing "cxc000000_APPLICATION_PHONE_SB_IAR-ARM-NAND.ssw"...OK
Writing "CXC_FS_CABS_LP_NAND.ssw"...OK
Disconnected.
ito naman finished product
sana makatulong............
LG GR500F
nakadale na naman ang pugita............
LG GR500F restart problem pag may sim card
ito procedure
1) open octopus LG tool
2) tick LG SEMC
3) select GR500F
4) load firmware
5) tick write firmware
6) sundan lang tong instruction na to
For correct working the battery must be fully charged!
Please, reconnect battery, press and hold camera button and connect USB cable.
If phone not connected, connect (solder) jumper according to picture ("Show testpoint" button).
note dapat full charge ang battery
pwede ring gumamit nang power supply
7) hintayin lang matapos ang flashing
ito po logs
Welcome to Octopus Box LG Software version 1.9.9
--------------------------------------------------------------------------------
Platform: LG SEMC
Selected port: COM9
Selected baudrate: 921600
Selected model: GR500F
Use Testpoint/Jumper: No
--------------------------------------------------------------------------------
For correct working the battery must be fully charged!
Please, reconnect battery, press and hold camera button and connect USB cable.
If phone not connected, connect (solder) jumper according to picture ("Show testpoint" button).
Starting...
Phone found!
Chip ID: 0xD9000401FFFFFFFF
Chipset: DB3200
BootROM mode detected
Sending ACC preloader...OK
Sending APP preloader...OK
CID: 54
IMEI: 359825-03-XXXXXX-5
Color: Red
Sending ACC production loader...OK
Sending APP production loader...OK
Reading Full flash...
Reading Full flash done!
Disconnected.
--------------------------------------------------------------------------------
Platform: LG SEMC
Selected port: COM9
Selected baudrate: 921600
Selected model: GR500F
Use Testpoint/Jumper: No
--------------------------------------------------------------------------------
For correct working the battery must be fully charged!
Please, reconnect battery, press and hold camera button and connect USB cable.
If phone not connected, connect (solder) jumper according to picture ("Show testpoint" button).
Starting...
Phone found!
Chip ID: 0xD9000401FFFFFFFF
Chipset: DB3200
BootROM mode detected
Sending ACC preloader...OK
Sending APP preloader...OK
CID: 54
IMEI: 359825-03-008023-5
Color: Red
Sending ACC production loader...OK
Sending APP production loader...OK
Reading APP GDFS...
Reading APP GDFS done!
Reading ACC GDFS...
Reading ACC GDFS done!
Disconnected.
--------------------------------------------------------------------------------
Platform: LG SEMC
Selected port: COM9
Selected baudrate: 921600
Selected model: GR500F
Use Testpoint/Jumper: No
--------------------------------------------------------------------------------
For correct working the battery must be fully charged!
Please, reconnect battery, press and hold camera button and connect USB cable.
If phone not connected, connect (solder) jumper according to picture ("Show testpoint" button).
Starting...
Phone found!
Chip ID: 0xD9000401FFFFFFFF
Chipset: DB3200
BootROM mode detected
Sending ACC preloader...OK
Sending APP preloader...OK
CID: 54
IMEI: 359825-03-XXXXXX-5
Color: Red
Sending ACC production loader...OK
Sending APP production loader...OK
Opening "GR500f-V10d-JUL-13-2009-TEL-AU.oct"...OK
Writing "cxc000000_APPLICATION_PHONE_SB_IAR-ARM-NAND.ssw"...OK
Writing "CXC_FS_CABS_LP_NAND.ssw"...OK
Disconnected.
ito naman finished product
sana makatulong............