DOWNLOAD LG Optimus Black P970 firmware flash file

[jeff3]

H

LG Optimus Black P970 firmware flash file
LG Optimus Black P970 firmware flash file

Build	Firmware	Size
lgp970_v30b_cis	Download	320 MB
LGP970AT-00-V20b-CIS	Download	249 MB
LGP970AT-00-V20a-CIS	Download	235 MB
LGP970AT-00-V10c-EUR	Download	229 MB
LGP970AT-00-V10b-CIS	Download	230 MB
LGP970AT-00-V10a-EEU	Download	228 MB

FLASHING INSTRUCTIONS
First, you need to download and install LG Mobile Universal driver if it has not been installed before. Download here

1. Unpack the archive “SmartFlashTool_External.rar” (Download here) with the utility “SmartFlash“. Unpack, preferably on disk “C”
2. Unpack the archive with the firmware, for example “BIN_LGP970AT-00-V10a-EEU-XXX-MAY-09-2011_0.zip“.
   (You can flash the firmware you need right away, this one is shown as an example)
   There are two files inside the archive (file names differ according to the firmware build you downloaded):
   • LGP970AT-00-V10a-EEU-XXX-MAY-09-2011 + 0_AP.bin
   • LGP970AT-00-V10a-EEU-XXX-MAY-09-2011 + 0_CP.fl
3. Run ” B_SmartFlashTool_Extern.exe ” as administrator
4. Select the ” ROM copy D / L ” tab
5. Set ” Select mode ” to ” Normal mode “
6. Select CP file: “LGP970AT-00-V10a-EEU-XXX-MAY-09-2011 + 0_CP.fls”
7. Select AP file: “LGP970AT-00-V10a-EEU-XXX-MAY-09-2011 + 0_AP.bin”
8. Connect the phone in the ” S / W Update ” mode :
   With the phone turned off , with the battery inserted, hold down the volume + key and connect the USB cable. The USB cable itself must be plugged into the rear connector of the motherboard . After that, the message ” S / W Update ” should appear on the phone , and the drivers will be installed on the computer, if you have not installed them before.
9. Select COM port (should be selected automatically)
10. Select “LGE Mobile USB Serial Port” in “Communication Driver” (should be selected automatically)
11. Click “Start” and wait for the end.