What's new
PinoyTechnician

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Lg-x145 hang loge solve tested fiwmware

abetskiy boy

Registered
Joined
Jun 7, 2015
Messages
230
Reaction score
2
Points
1
HANG LOGO PO ITO YUN PIC PO NA PATUNAY NA SUCCESES ANG FW NA GNAMIT KO

image.png


lg_2.png



PACINSYA NA WALA AKO PIC SA PHONE

FW:https://mega.nz/#F!cZwRAaJa!RiweJmDVoDk9WzS96NhAsQ

SANA MAKATULUNG PO
 
ok talaga ang firmware na yan ang problema lng po is yong sa data ayaw lumbas ang 3g naka 2g lang po siya...
 
Thank you!

TESTED


:-bd​

EMMC: (29Gb+4096Mb) HYNIX 0x483447316404
EMMC FW VERSION: 05:00:00:00:00:00:00:00
EMMC CID: 90014A48344731 : 000000000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9c00000 [3.652 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM8)
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash EMMC Algo Start.
Starting flash.
Download firmware to flash now...
Wait untill phone will start charging.
All done.
 
Last edited by a moderator:
Back
Top