What's new
PinoyTechnician

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

MAI X1 Logo Done sa NCK Crack

JULAY20

Moderator
Staff member
Joined
Aug 6, 2014
Messages
10,034
Reaction score
2,687
Points
1,611
Location
KORONADAL CITY
MAI X1 Logo Done sa NCK Crack

post ko lang mga boss:


History:
dinala ni tumer sa shop tolala lang sya sa logo
sabi ni tumer galing daw sa labas pinadala ng asawa nya kaya
hanap ako file sa kasamang palad meron namn pero my bayad
kaya napa isipako try ko CM2 no lock ayaw din mag back up
hanap ako try ko MC crack kaya lang napa isip ako
baka ma toloyan nyahh
kaya naisip ko sa NCK Crack nalang kaya try ko format user data lang
mag hang logo namn eh ...

ito sya

click

http://postimage.org/

LOG:
Code:
 Action : Format UserData.
 Selected 0-By CPUM 0-By [COLOR="Red"]CPUMT6592[/COLOR]
 Exe version: NCKDongle AndroidMTK 2.5.6.2
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : PreLoader USB VCOM Port (COM8)
 Phone detected...Please wait
 Sending DA agent, please wait...
 BaseBand CPU :MT6572_S00
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 256 MB  DRAM
----------------------------------------------------
 NAND: (4Gb+2048Mb) [Micron] MT29C4G96MAZAPCJA_5IT 
 BOOT STYLE : NAND BOOT
 Size: 0x20000000       [0.500 GB]
 BlockSize: 2048 SpareSize: 64  BMT Blocks 80
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detecting high speed port, wait......
 Detected : DA USB VCOM Port [COLOR="Cyan"](COM16)[/COLOR]
 Searching partiton table, wait..
 [0]Part: PRELOADER Begin: 0x0              Len: 0x100000        
 [1]Part: PRO_INFO Begin: 0x100000         Len: 0x100000        
 [2]Part: NVRAM Begin: 0x200000         Len: 0x300000        
 [3]Part: PROTECT_F Begin: 0x500000         Len: 0x300000        
 [4]Part: PROTECT_S Begin: 0x800000         Len: 0x300000        
 [5]Part: SECCFG Begin: 0xb00000         Len: 0x40000         
 [6]Part: UBOOT Begin: 0xb40000         Len: 0x80000         
 [7]Part: BOOTIMG Begin: 0xbc0000         Len: 0x600000        
 [8]Part: RECOVERY Begin: 0x11c0000        Len: 0x600000        
 [9]Part: SEC_RO Begin: 0x17c0000        Len: 0x40000         
 [10]Part: MISC Begin: 0x1800000        Len: 0xc0000         
 [11]Part: LOGO Begin: 0x18c0000        Len: 0x100000        
 [12]Part: EXPDB Begin: 0x19c0000        Len: 0x200000        
 [13]Part: FAT Begin: 0x1bc0000        Len: 0x1400000       
 [14]Part: ANDROID Begin: 0x2fc0000        Len: 0x15e00000      
 [15]Part: CACHE Begin: 0x18dc0000       Len: 0x700000        
 [16]Part: USRDATA Begin: 0x194c0000       Len: 0x6100000       
 [17]Part: BMTPOOL Begin: 0xffff0050       Len: 0x0             
 Offset: 0x1f598000       Count: 18
 Detecting format adress....wait!
 
 FORMAT NAND FLASH :  BEGIN: 0x18dc0000       - [COLOR="Yellow"]LEN: 0x700000        [/COLOR]
 FORMAT NAND FLASH :  BEGIN: 0x194c0000       - [COLOR="Yellow"]LEN: 0x6100000       
[/COLOR] Phone can start slow at first power on
 If phone stuck on logo, perform wipe from recovery.
 First start can take up to 5 min on some phones.
 Wait untill phone will start charging.
 All done. [COLOR="SeaGreen"]<------------ [B]DONE[/B][/COLOR]


http://postimage.org/

http://postimage.org/

Done fore reference lang lang back up masyadong hot yong tumer gamitin ang phone eh
lagi sabe tagal pa boss tagal pa ba my lakarin kc ako tagal pa ba sarap ikaw nalang dito ohh=))=))
 
Back
Top