MFC Dongle Version 1.2.6 (2015-05-30 updated)★★★★★

[.::Gsmdenis::.]

We're Very happy to announce the release of MFC Dongle Version 1.2.6 . While most of New functions adds and some bug fixes in the software.


Changelogs for MFC Dongle V1.2.6 ?



iDevice Changelogs:

• iDevice iOS 8.x :
  • "iOS 8-8.1 auto V7" option (Detection Value Display on Phone Screen)
    • Add "Sirtpe Pattern" Use to Put MFC light Sensor (World first)
    • Add Light Sensor Current Detected Status Value "L"
    • Add MFC LEDs Activating Fast Blinking Mode Function After Code Found
    • Change Phone Communication Current Detected Status Value "S"
    • Change Phone Current Detected Code Value "Code"
    • Screen Message display time Improved
    • V7 Firmware updated on Server

iDevice Tools Changelogs:

• Add User /System Applications Read Function
• Add User /System Applications Update Function
• Add User /System Applications Install Function
• Add User /System Applications Uninstall Function
• Add One button Restart iDevice Function
• Add One button ShutDown iDevice Function
• Add One button Read iDevice Diagnostics info Function
• Add One button Read iDevice Time info Function
• Add One button Sync iDevice Time Function
• Add One button Set iDevice Time Function (Beta)
• And More....

MFC Tools Changelogs:

• Add useful /Help Link

Upgrading to new Versions:

• We recommend all customers to upgrade to this latest version 1.2.6. The downloaded version of the software is available now, You can download from support page with valid membership.

THE RIGHT iDEVICE TOOLS MAKES A DIFFERENT, THAT'S MFC

 

[.::Gsmdenis::.]

 

[.::Gsmdenis::.]

About iOS Auto 8.0 - 8.1 For V1.2.6

• V7 Update was improved from V6, So the unlocking procedure will be same as V6. but this update we have added "Delay waiting Phone to charge function" for each 50 reboots. Mean's each 50 reboots, MFC will be automatic stopping and Charging the Phone battery. So You have to set the delay time., Check below about How long time for delay we have to input when we write settings ?

• About the light sensor connection status checks function. This can detect the light sensor if connected or gets enough light , If something wrong. the unlock procedure will be stop. Brightness icon will be stay showing. and the Status Will be showing on Phone Screen "L" , the value if less then 40, then you need to double check the sensor connection and sensor must be new one with 2002.

• About POWER/HOME button connection status checks function.
  • For "HOME button" will be automatic Check the Test Point if connect to iPower adaptor "P0" PIN. If not unlock procedure will be not continue.
  • For "POWER button" will be automatic Check If permanently pressed. If not unlock procedure will be not continue.
  • 
    Important Note! You need to take care about above issue when you start unlock. Due to if you don't do any actions, in 45 seconds, MFC will be RETRY.

Why we need this Function ?

Because Phone each reboots will be takes a lot of Power, so Phone can not gets time for Charge the battery. In V7 you need setting exact delay second times. Otherwise, if you can keep default settings. this can bring disabled risk once the phone become battery finish.

Sensor Position Must put on the "Sirtpe Pattern" ?

Yes, must be there, This "Sirtpe Pattern" Area Special for light sensor position (Due different iDevice with different background image).

V7 working on 8.1.1 8.1.2 8.1.3 and new iOS ?

No , this version not support those versions.

How long time for delay we have to input when we write settings ?

Due different phone with different battery life, so this need user calculate exact delay times. We have design one calculator at "MFC Tools" Tab.

To "Customize Calculator" delay time required 4 values.

We recommend using StopWatch to Calculator this. but first we need full charge the unlock phone to be 100%.

For Example:

• Reboot times - We recommend 30 times Reboot
• Used percentage - This battery usage , E.g. 30 Reboot, Battery becoming to 80%. So we used 20%
• Charging time (minutes) - Using 3 in 1 cable to Charging Phone Time. E.g. 20 minutes
• Charging percentage - E.g. Charging 10%

So v7 Delay time to input: 4000 (seconds)

So , this means phone after 50 reboots, MFC will stop sending code to phone and keep waiting 4000 seconds to Charging the phone battery.

**********************************************************

From 21 May When we release this new Version 1.2.5. Our beta tester report 1 issue that i have to explain here:

Example (iPhone 6):



Description:
When start unlocking , We got 5 times chance to input the code per rebboot. but if you keeping unlock you may discovery the attempting time has been reduce to 2-4 times etc (Mean's 2-4 times input the code per reboot).


Reason:
Because the environment light have brought many changes on the phone screen that could be casing stability coefficient of the sensor.


Solution:
Put the unlocking sets in darkroom or in the dark cover to completely isolate the environment light.

After unlock Done The code will be showing on the phone screen as below image. The "S" will be with a SMILE ICON, The same time Dongle LEDs will be Activating in Fast Blinking Mode. And Phone will be automatic stop Charging.