Moto G, aka XT1032 Lock sa TELUS
Tools
1, Sigma Box W/Pact 2 Activation
2, Micro USB
3, USB Driver http://sigmakey.com/nfs/content/6104/file/Moto_diag_Drivers.zip
Direct Unlock For "Moto G"
1, Select "Qualcomm" platform from the tab menu in the upper left side of the software
2, "Phone model" dropdown menu has to be set to "Autodetect"
3, Go to "Unlock" tab
4, Set the phone to the special mode:
a-Turn the phone OFF
b-Press Vol -, Power ON, then release Power ON button
c-Select BP Tools in the appeared menu, then confirm selection with Vol+ button
5, Connect the phone to PC using USB cable
6, Install required USB Driver (only if the phone is connected for the first time)
7, Select Diag port in the ports selection tab
8, Press "Unlock" button
9, The message "Done" indicates that the procedure has been completed successfully
10, Wait for the message "Restarting phone... Done" to appear in Sigma dialog window;
only after that you can turn off the phone
Installing Driver
Unlock Done,
Tools
1, Sigma Box W/Pact 2 Activation
2, Micro USB
3, USB Driver http://sigmakey.com/nfs/content/6104/file/Moto_diag_Drivers.zip
Direct Unlock For "Moto G"
1, Select "Qualcomm" platform from the tab menu in the upper left side of the software
2, "Phone model" dropdown menu has to be set to "Autodetect"
3, Go to "Unlock" tab
4, Set the phone to the special mode:
a-Turn the phone OFF
b-Press Vol -, Power ON, then release Power ON button
c-Select BP Tools in the appeared menu, then confirm selection with Vol+ button
5, Connect the phone to PC using USB cable
6, Install required USB Driver (only if the phone is connected for the first time)
7, Select Diag port in the ports selection tab
8, Press "Unlock" button
9, The message "Done" indicates that the procedure has been completed successfully
10, Wait for the message "Restarting phone... Done" to appear in Sigma dialog window;
only after that you can turn off the phone
Installing Driver
Unlock Done,