Motorola MB200 Unlock Done**.[Reference] T-Mobile Locked...

[solenn]

Motorola MB200 Unlock Done**.[Reference]

T-Mobile Locked...


​

Procedure:
Direct unlock

1.Turn the phone on and wait for it to fully start up
2.Connect the phone to PC with USB cable
3.Ensure that the phone is not connected in USB mass storage mode
4.Install Motorola drivers (only if the phone is connected for the first time)
5.Select "Qualcomm" platform from the tab menu in the upper left side of the software
6.Go to "Unlock" tab
7.Press “Connect Motorola Android phoneâ€￾
8.Select "Motorola USB Diagnostic Port" in the ports selection tab
9.Press "Unlock" button
10.Message "Unlocking phone… Done" indicates that procedure was completed successfully
11.Disconnect the handset
12.Phone is unlocked

[/URL]


SigmaKey 1.18.05
********* Sigma dongle 1.20, Initializing...OK
SigmaKey 1.18.05 Qcom: Connect Motorola Android phone
Connecting...Done
SigmaKey 1.18.05 Qcom: Direct unlock
Motorola USB Diagnostic Port (COM109), Provider: Motorola, Driver ver.: 5.0.0.0, Date: 6/8/2012
Phone model: Motorola MB200
FLEX: USAMOR01TMOBNA032.0R
Firmware: M76XX-SDCBALUM-63805030
Date: Mar 9 2010 14:01:54, Feb 18 2010 17:00:00, SDCBALUM
IMEI: 351555040379430
Bluetooth address: A4ED4E7B6B87
Security area saved to "C:\Users\chronic0128\Documents\SigmaKey\security backup\351555040379430_SDCBALUM_Mar 9 2010_140154_Feb 18 2010_170000.skb"
Unlocking phone...Done
Restarting phone...Done


MG][/IMG]

[/URL][/I