Motorola Moto G Unlocked Done

[Greed]

Share ko lang to mga ANT-TECHS. Moto G Network Locked

Unlocking Procedure

0.Open SigmaBox
1.Select "Qualcomm" platform from the tab menu in the upper left side of the software
2."Phone model" dropdown menu has to be set to "Autodetect"
3.Go to "Unlock" tab
4.Set the phone to the special mode:
5.Turn the phone OFF
6.Press Vol -, Power ON, then release Power ON button
7.Select BP Tools in the appeared menu, then confirm selection with Vol+ button
8.Connect the phone to PC using USB cable
9.Install required USB Driver (only if the phone is connected for the first time)
10.Select QC Diag port in the ports selection tab
11.Press "Unlock" button
12.The message "Done" indicates that the procedure has been completed successfully
13.Wait for the message "Restarting phone... Done" to appear in Sigma dialog window; only after that you can turn off the phone

Logs:

SigmaKey v.2.26.‎04
9480463xx Sigma dongle 2.26, Initializing...OK
Pack 1: Activated
Pack 2: Activated
Pack 3: Activated
--------- ‎2017-08-04 13:32:23 ---------
SigmaKey 2.26.04 Qcom: Get unlock codes
Motorola QC Diag Port (COM24), Provider: Motorola, Driver ver.: 5.1.0.0, Date: 3/1/2013, USB\VID_22B8&PID_2E28&REV_0228&MI_00
Firmware: MPSS.DI.4.0.1.c1.2-00002-M8926DAAAANAZM-1
Date: May ‎27 2015 04:53:49, Apr ‎07 2015 12:00:00, DAAAANAZ
Software IMEI: ‎359291053852080
Bluetooth address: ‎000000000000
Unable to read codes for this phone model. Do you want to perform direct unlock instead? [YES]
Unlocking phone.........Done
Restarting phone....PLEASE RESTART PHONE MANUALLY!
Done

Result

MOTOROLA DIAG DRIVER

SIGMA BOX SETUP

THANKS FOR WATCHING

​

 

[chaje]

boss

boss bka may pang open line k dyan ng motorola razr v3 tnx